Справочник Пользователя для ZyXEL 202H 91-003-194003B

P-202H Plus v2 User’s Guide

269

Chapter 28 System Information and Diagnosis

The following figure shows an example of a successful connection after selecting option 
Manual Call in Menu 24.4.

Figure 168   Display for a Successful Manual Call

Manual Call

This provides a way for you to place a call to a remote node manually. This 

tests the connectivity to that remote node. When you use this command, 

the screen displays what is happening during the call setup and protocol 

negotiation. The following is an example of a successful connection.

Internet Setup Test

This test checks to see if your Internet access configuration has been done 

correctly. When this option is chosen, the ZyXEL Device places a manual 

call to the ISP remote node. If everything is working properly, you will 

receive an appropriate response. Otherwise, note the error message and 

consult your network administrator.

Ping Host

This diagnostic test pings the host, which determines the functionality of 

the TCP/IP protocol on both systems and the links in between.

Reboot System

This option reboots the ZyXEL Device.

Command Mode

This option allows you to enter the command mode. It allows you to 

diagnose and test your ZyXEL Device using a specified set of commands.

Manual Call Remote Node If you entered 5 above, then enter the remote node number (with reference 

to the remote node listing on Menu 11 - Remote Node Setup) you wish to 

call.

Host IP Address

If you entered 12 above, then enter the IP address of the machine you 

want to ping in this field.

Enter the number of the selection you would like to perform or press [ESC] to cancel.

Start dialing for node <1>
### Hit any key to continue. ###
Dialing chan<2> phone<last 9-digit>:12345
Call CONNECT speed<64000> chan<2> prot<1>
LCP up
CHAP send response
CHAP login to remote OK!
IPCP negotiation started
IPCP up

Table 90   System Maintenance Menu Diagnostic