Справочник Пользователя для Zebra HW46211

13185L-002 Rev. A 1/24/06

110XiIIIPlus Maintenance Manual

Page 2-19

Operations Overview

Section 2

Adjust Upper Media Sensor 

Refer to 

. (For clarity, not all printer parts are shown.)

1. Remove the ribbon (if it is installed).

2. Locate the upper media sensor. The upper media sensor “eye” is directly below the 

adjustment screw head.

3. Slightly loosen the upper media sensor adjustment screw, one half to one full turn 

maximum.

4. Using the tip of the screwdriver, slide the upper sensor along the slot to the desired 

position.

5. Secure the upper media sensor by tightening the screw.

Adjust Lower Media Sensor 

Refer to 

 and position the lower media sensor by sliding it in its slot until it is 

positioned under the upper media sensor.

Black Mark Sensor

The black mark sensor is in a fixed position and enabled via the front panel (details in 

Configuring the Printer in the Users Guide).

Lower Media

Sensor