Справочник Пользователя для Saeco Super-automatic espresso machine HD8745/22 HD8745/22

14

 Set the fi lter according to the measurements performed to set the wa-

ter hardness. Use the water hardness test strip provided with the fi lter. 
Set the “Intenza Aroma System” as specifi ed on the fi lter package.

A = Soft water
B = Hard water (standard)
C = Very hard water

 Put the fi lter into the empty water tank. Press it until it cannot move 

further down.

 Fill the water tank with fresh water and reinsert it into the machine. 

Write down the date of the next water fi lter replacement (+ 2 months).

 To activate the water fi lter, dispense the entire water tank by using the 

hot water function (see section “Hot Water Dispensing”). 

 Fill the water tank again.

The machine is now ready.

 Remove the small white fi lter from the water tank and store it in a dry 

place.

 Remove the “INTENZA+” water fi lter from its packaging, immerse it 

vertically (with the opening positioned upwards) in cold water and 
delicately press the sides so as to let the air bubbles out.

You can purchase separately the Intenza+ water fi lter. Please refer to the 
accessory page in this usermanual for further details.
 Water is a crucial part of every espresso-so it’s most important to always 
have it professionally fi ltered. Using the “INTENZA+” water fi lter will prevent 
mineral deposits from building up and improve your water quality.