Справочник Пользователя для Epson EH-TW8100 V11H524070LW
Модели
V11H524070LW
Configuration Menu
72
Function
Menu/Settings
Explanation
(Advanced)
Overscan
*1
*2
Auto, Off, 2%, 4%,
6%, 8%
6%, 8%
Changes the output image ratio (the range of the
projected image).
projected image).
•
Off, 2 to 8%: Sets the range of the image. Off
projects all ranges. Depending on the image sig-
nal you may notice noise at the top and bottom
of the image.
projects all ranges. Depending on the image sig-
nal you may notice noise at the top and bottom
of the image.
•
Auto: This can only be set when receiving signal
input from the HDMI1 or HDMI2 ports, or from
WirelessHD. This may be automatically set to
Off or 8% depending on the input signal.
input from the HDMI1 or HDMI2 ports, or from
WirelessHD. This may be automatically set to
Off or 8% depending on the input signal.
HDMI Video
Range
Range
*2
*6
Auto, Normal, Ex-
panded
panded
(This can only be set when EPSON Super
White is set to Off.)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports, or to
the WirelessHD is automatically detected and
set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be set to Normal or Expand.
The Auto option is not displayed when connec-
ted to a connected device's DVI port.
White is set to Off.)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports, or to
the WirelessHD is automatically detected and
set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be set to Normal or Expand.
The Auto option is not displayed when connec-
ted to a connected device's DVI port.
Image Processing
Fine, Fast
Performs processing to improve the image.
s
Reset
Yes, No
Resets all Signal settings except for Aspect to
their default settings.
their default settings.
*1
This is only displayed when a Component, HDMI1, HDMI2, or WirelessHD image signal is being input.
(WirelessHD is for EH-TW9100W/EH-TW8100W only.)
(WirelessHD is for EH-TW9100W/EH-TW8100W only.)
*2
Settings are saved for each type of input source or signal.
*3
This is only displayed when a PC image signal is being input.
*4
This cannot be set when an HDMI1, HDMI2, or WirelessHD image signal is being input.
*5
This is not displayed when a PC image signal is being input.
*6
This is not displayed when a Video image signal is being input.
*7
Only EH-TW9100W/EH-TW9100 is displayed.