Листовка для Transition Networks CAPTF3329-108
Point System™
Loop Extender/Isolator
Automatic Ring Down
*Note: CAPTF cards cannot be used with the 1-Slot Point System™ Chassis™ .
Devices must be used in pairs. Typical installation will include a chassis card installed in the Point
System™ locally and a stand-alone device [SAPTF, pg 120] installed at the remote location.
Specifications
Standards
FCC Part 68, TBR21
Analog Port
Connector: RJ-11
(Telephone Emulation or FXS)
Impedance: 600 ohms
REN: 0.48
Loop Current: 20 to 60ma.
Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz when both
ports are terminated at 600 ohms
Analog Port
Impedance: 600 ohms
(Central Office Emulation or FXO)
Battery Source: 48 VDC +/- 5V
Ringing Supply: 90Vp-p
Ring Frequency: 25 Hz.
(Reproduces frequency detected by side A)
Ring Cadence: Reproduces cadence detected by side A
Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz
when both ports are terminated at 600 ohms
Voice Frequency
300 Hz – 3 KHz
Switches/Option Jumpers
Automatic Ring Down/Normal
Status LEDs
LED colors are Green
SDF (Fiber Link): On indicates fiber link up;
ACT (In Use): On indicates unit in use;
Flashing indicates ringing;
PWR (Power): On indicates power is on
Dimensions
105 Model:
Height: 3.4” [86 mm]
Depth: 5.0” [182 mm]
Width: 0.86” [22 mm]
115 Model:
Height: 3.4” [86 mm]
Depth: 5.0” [182 mm]
Width: 1.75” [43 mm]
Power Consumption
105 Model:
4 Watts
115 Model:
7 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Emissions Compliance
FCC Class A; VCCI Class A; EN 55022 (CISPR 22)
Class A; ICES 003
Safety Compliance
CISPR A; CE Mark
Warranty
Lifetime
CAPTF33xx-1xx
CAPTF33xx-1xx
point system™ slide-in-module network interface device
Connect central-office voice grade
signals to distant Plain Old Telephone
equipment
signals to distant Plain Old Telephone
equipment
(POTS)
utilizing standard
telephone signaling. Two units are
required to implement an end to end
system. Unit A connects to a telephone
line or PBX and has the ability to de-
tect ringing voltages and to act as a
telephone
required to implement an end to end
system. Unit A connects to a telephone
line or PBX and has the ability to de-
tect ringing voltages and to act as a
telephone
(LINE SIDE FXS).
Unit B is the
reciprocal unit and has the ability to act
as a Central Office and connects to a
telephone device
as a Central Office and connects to a
telephone device
(CUSTOMER SIDE FXO).
POTS 2-Wire Copper to Fiber
POTS 2-Wire
see also:
POTS 2-Wire Stand-Alone NIDs
POTS 2-Wire Copper to Fiber NID
(Network Interface Device)
Features
4
Audio transmission
4
Caller ID
4
Automatic Ring Down
4
Dual or single fiber options
4
SNMP Management
4
Ringing at the distant end
4
Electrical interface is provided
through an RJ-11 female connector
4
Field Upgradeable Firmware
Ordering Information
Line Side FXS: CAPTF3311-105
Customer Side FXO: CAPTF3311-115
Customer Side FXO: CAPTF3311-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Line Side FXS: CAPTF3313-105
Customer Side FXO: CAPTF3313-115
Customer Side FXO: CAPTF3313-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
Line Side FXS: CAPTF3314-105
Customer Side FXO: CAPTF3314-115
Customer Side FXO: CAPTF3314-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
Line Side FXS: CAPTF3315-105
Customer Side FXO: CAPTF3315-115
Customer Side FXO: CAPTF3315-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
Line Side FXS: CAPTF3316-105
Customer Side FXO: CAPTF3316-115
Customer Side FXO: CAPTF3316-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 33.0 dB
Line Side FXS: CAPTF3317-105
Customer Side FXO: CAPTF3317-115
Customer Side FXO: CAPTF3317-115
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
Single Fiber Products
Recommended use in pairs
Line Side FXS: CAPTF3329-105*
Customer Side FXO: CAPTF3329-115*
Customer Side FXO: CAPTF3329-115*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: CAPTF3329-106*
Customer Side FXO: CAPTF3329-116*
Customer Side FXO: CAPTF3329-116*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
Line Side FXS: CAPTF3329-107*
Customer Side FXO: CAPTF3329-117*
Customer Side FXO: CAPTF3329-117*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to
1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
Line Side FXS: CAPTF3329-108*
Customer Side FXO: CAPTF33129-118*
Customer Side FXO: CAPTF33129-118*
Twisted Pair (RJ-11)
[5 km/3.1 mi.]
to 1550nm TX/1310nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
* Note: Single Fiber products should be paired
by application:
Loop Extender/Isolator Application
Line Side FXS: CAPTF3329-105
Customer Side FXO: CAPTF3329-116
Line Side FXS: CAPTF3329-105
Customer Side FXO: CAPTF3329-116
Automatic Ring Down Application
Line Side FXS: CAPTF3329-107
Line Side FXS: CAPTF3329-107
Customer Side FXO: CAPTF3329-108
POTS 2-Wire Copper to Fiber