Справочник Пользователя для IBM Flex System V7000 Expansion Enclosure 4939H29
Модели
4939H29
8068ch03-Sys Manage.fm
Draft Document for Review January 29, 2013 12:52 pm
130
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
3.3.5 Accessing I/O Modules using FSM
In an IBM Flex system, node to node communication happens within the Chassis.
Network Control
Network Control is a plug-in that enables utilization of integrated network management
capabilities of an FSM. It has the following key features:
capabilities of an FSM. It has the following key features:
Logical network management – allows management of port profiles, VLANs, ACLs and
QoS in virtualized, live-migration environments
QoS in virtualized, live-migration environments
Leverages 802.1Qbg standards in integrated switches and PowerVM, KVM and IBM
“Osiris” vSwitch for VMware
“Osiris” vSwitch for VMware
Optional Fabric Management extends QoS Management providing advanced monitoring,
VM priority and rate limiting
VM priority and rate limiting
Network monitoring at a glance via network topology perspectives with the ability to see
the components affected by network outages
the components affected by network outages
Enable end-to-end network and virtualization management
To access Network Control, from IBM FSM Explorer, select Home menu
Network
Control, as shown in Figure 3-71.
Figure 3-71 IBM FSM Explorer - Network control
This will open up the Network Control interface, which shows management and configuration
options for the IBM Flex System I/O Modules, as shown in Figure 3-72 on page 131.
options for the IBM Flex System I/O Modules, as shown in Figure 3-72 on page 131.