Справочник Пользователя для IBM Flex System V7000 Expansion Enclosure 4939H29
Модели
4939H29
Chapter 4. IBM Flex System V7000 Storage Node Initial Configuration
153
Draft Document for Review January 29, 2013 12:52 pm
8068ch04-Initial Config.fm
4.1.6 Management interface planning
IBM PureFlex Systems are pre-configured, pre-integrated infrastructure systems with
different management options:
different management options:
��
Chassis Management Module (CMM)
��
Flex System Manager (FSM)
For information and the actual implementation of the management modules, refer to
Implementing Systems Management of IBM PureFlex System, SG24-8060
Implementing Systems Management of IBM PureFlex System, SG24-8060
Chassis Management Module (CMM)
The IBM Flex System Enterprise Chassis Management Module (CMM) is a hot-swap module
that configures and manages all installed chassis components. The chassis comes with one
Chassis Management Module in the CMM bays.
that configures and manages all installed chassis components. The chassis comes with one
Chassis Management Module in the CMM bays.
The IBM Flex System Chassis Management Module auto-detects and manages the hardware
of the entire Flex chassis and provide centralized system monitoring and management.
of the entire Flex chassis and provide centralized system monitoring and management.
For more details, see Chapter 3, “Systems Management” on page 81.
The IBM Flex System Manager Node (FSM)
The Flex System Manager (FSM) is an advanced chassis management appliance which
provides the ability to manage up to four enterprise chassis. It is designed with a specialized
compute node, storage, networking, and provides physical and virtual management
capabilities.
provides the ability to manage up to four enterprise chassis. It is designed with a specialized
compute node, storage, networking, and provides physical and virtual management
capabilities.
The FSM appliance is based on an Intel-based x86 compute node that comes with preloaded
management software. The FSM software contains a fully operational management stack for
managing multiple chassis from a single focal-point for support of all assets and resources in
IBM PureFlex Systems handling the complete range of management tasks. The following is a
list of the tasks that can be performed from by the FSM:
management software. The FSM software contains a fully operational management stack for
managing multiple chassis from a single focal-point for support of all assets and resources in
IBM PureFlex Systems handling the complete range of management tasks. The following is a
list of the tasks that can be performed from by the FSM:
��
Service requests
��
Incident handling and problem resolution
��
Handling specialized management tasks in connection with:
– Security
– Performance
– Resource allocation
– Application version control
– Performance
– Resource allocation
– Application version control
4.2 Initial setup for IBM Flex System V7000 Storage Node
When a new IBM Flex System V7000 Storage Node control enclosure is installed in the Flex
System chassis for the first-time you must create and configure it into
System chassis for the first-time you must create and configure it into
clustered system
. The
following procedure will guide you through the necessary steps to set up your IBM Flex
System V7000 Storage Node system for the first time in this configuration.
System V7000 Storage Node system for the first time in this configuration.
Note: The IBM Flex System Chassis Management Module provides control and
information on the storage hardware, while the IBM Flex System Manager in addition
provides configuration functionality.
information on the storage hardware, while the IBM Flex System Manager in addition
provides configuration functionality.