Справочник Пользователя для IBM Flex System V7000 Expansion Enclosure 4939H29
Модели
4939H29
Chapter 4. IBM Flex System V7000 Storage Node Initial Configuration
169
Draft Document for Review January 29, 2013 12:52 pm
8068ch04-Initial Config.fm
launched and accessed via CMM after the management IP been assigned to your new Flex
System V7000 storage node.
System V7000 storage node.
To start, log in to the CMM GUI and navigate to the chassis map. Right Click on the canister
you wish to launch and select Launch Storage Node Controller Console to access storage
node management GUI. See Figure 4-26
you wish to launch and select Launch Storage Node Controller Console to access storage
node management GUI. See Figure 4-26
Figure 4-26 To launch storage node controller console via chassis map
To Launch the IBM Flex System V7000 Storage Node management GUI, select the Interface
IP address (Figure 4-27) and click Launch to start the Storage Node Controller Console.
IP address (Figure 4-27) and click Launch to start the Storage Node Controller Console.
Figure 4-27 Launch to start the Storage Node Controller Console
4.5 Service Assistant
The primary use of the Service Assistant is when a node canister in the IBM Flex System
V7000 Storage Node enclosure is in service state. The node canister might be in service
state because it has a hardware issue, has corrupted data, or has lost its configuration data.
The node canister cannot be active as part of a system while it is in service state.
V7000 Storage Node enclosure is in service state. The node canister might be in service
state because it has a hardware issue, has corrupted data, or has lost its configuration data.
The node canister cannot be active as part of a system while it is in service state.
Attention: Perform service actions on node canisters only when directed to do so by the
fix procedures. If used inappropriately, the service actions that are available through the
Service Assistant can cause loss of access to data or even data loss.
fix procedures. If used inappropriately, the service actions that are available through the
Service Assistant can cause loss of access to data or even data loss.