Справочник Пользователя для IBM Flex System V7000 Expansion Enclosure 4939H29

Draft Document for Review January 29, 2013 12:52 pm

IBM Flex System V7000 Storage Node Introduction and Implementation Guide

��

Four physical I/O modules.

��

An I/O architectural design capable of providing:

– Up to 8 lanes of I/O to an I/O adapter card; each lane capable of up to 16 Gbps
– A maximum of 16 lanes of I/O to a half wide-node with two adapters
– A wide variety of networking solutions including Ethernet, Fibre Channel, FCoE, and 

InfiniBand

��

Up to two IBM Flex System Manager (FSM) management appliances for redundancy. The 
FSM provides multiple-chassis management support for up to four chassis.

��

Two IBM Flex System Chassis Management Module (CMMs). The CMM provides 
single-chassis management support.

The chassis can be configured with the following information about the chassis location: 

– Rack Room
– Rack Location
– Position in Rack (the lowest Rack Unit occupied by the Chassis)
– Chassis Name 
– Bay  Id

Individual components will then be able to work out their bay in the chassis, the IBM Flex 
System V7000 Storage Node enclosure uses 4 bays (double wide and double tall) per 
enclosure and will report it’s bay as the lowest left bay that it occupies. 

Figure 1-5 shows the rear of the chassis where the IO modules and chassis management 
modules can be seen.

The following components can be installed into the rear of the chassis

��

Up to two  IBM Flex System Chassis Management Modules (CMM).