Справочник Пользователя для ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B
Модели
91-003-154001B
P-202H Plus v2 User’s Guide
Chapter 23 Network Address Translation (NAT)
216
The following table describes the options for Network Address Translation.
23.3 NAT Setup
Use the address mapping sets menus and submenus to create the mapping table used to assign
global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full
Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT
will use the pre-configured Set 255 (read only).
global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full
Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT
will use the pre-configured Set 255 (read only).
The server set is a list of LAN servers mapped to external ports. To use this set, a server rule
must be set up inside the NAT address mapping set. Please see the section on port forwarding
in the chapter on NAT web configurator screens for further information on these menus. To
configure NAT, enter 15 from the main menu to bring up the following screen.
must be set up inside the NAT address mapping set. Please see the section on port forwarding
in the chapter on NAT web configurator screens for further information on these menus. To
configure NAT, enter 15 from the main menu to bring up the following screen.
Figure 113 Menu 15 NAT Setup
23.3.1 Address Mapping Sets
Enter 1 to bring up Menu 15.1 - Address Mapping Sets.
Table 73 Applying NAT in Menus 4 & 11.3
FIELD
DESCRIPTION
NAT
Press [SPACE BAR] and then [ENTER] to select Full Feature if you have multiple
public WAN IP addresses for your ZyXEL Device. The SMT uses the address mapping
set that you configure and enter in the Address Mapping Set field (menu 15.1 - see
section ). When you select Full Feature you must configure at least one address
mapping set.
Select None to disable NAT.
When you select SUA Only, the SMT uses Address Mapping Set 255 (menu 15.1 - see
section ). Choose SUA Only if you have just one public WAN IP address for your
ZyXEL Device.
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
2. NAT Server Sets
Enter Menu Selection Number: