Справочник Пользователя для ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B
Модели
91-003-154001B
P-202H Plus v2 User’s Guide
Chapter 2 Introducing the Web Configurator
42
2 Press the RESET button for ten seconds or until the POWER LED begins to blink and
then release it. When the POWER LED begins to blink, the defaults have been restored
and the ZyXEL Device restarts.
and the ZyXEL Device restarts.
2.4 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Site Map screen.
Figure 8 Web Configurator: Main Screen
Note: Click the
icon (located in the top right corner of most screens) to view
embedded help.
The following table describes the sub-menus.
Table 2 Web Configurator Screens Summary
LINK
SUB-LINK
FUNCTION
Wizard Setup
Use these screens for initial configuration including general
setup, ISP parameters for Internet Access and WAN IP/DNS
Server/MAC address assignment.
Advanced Setup
Password
Use this screen to change your password.
LAN
LAN Setup
Use this screen to configure LAN DHCP and TCP/IP settings.
WAN
Internet Access
Setup
Use this screen to configure Internet Service Provider
parameters.
NAT
NAT Mode
Use this screen to enable NAT.
SUA Server
Use this screen to configure servers behind the ZyXEL Device.
Address Mapping
Use this screen to configure network address translation
mapping rules.
Dynamic DNS
Use this screen to allow the ZyXEL Device to use dynamic host
name resolution.
Firewall
Config
Use this screen to enable the firewall.
Email
Use this screen to send logs and alert messages to an email
account.
Click Logout any time to exit the
web configurator.