Листовка для Moxa EDS-P506A-4PoE-MM-ST-T EDS-P506A-4POE-MM-ST-T

w w w. m o x a . c o m

i n f o @ m o x a . c o m

Industrial Ethernet Solutions

The EDS-P506A-4PoE series managed redundant Ethernet switches  
come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af 
(PoE) compliant Ethernet ports and 2 10/100BaseT(X) or 2 
10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide 
up to 30 watts of power per PoE port, and allow power to be supplied 

•  Advanced PoE management function (PoE port setting, PD failure 

check, and PoE scheduling)

•  24/48 VDC wide range redundant power inputs
•  IPv6 Ready logo awarded (IPv6 Logo Committee certified)
•  Command Line Interface (CLI) for quickly configuring major 

managed functions

•  IEEE 1588 PTP V2 (Precision Time Protocol) for precise time 

synchronization of networks

•  Support EtherNet/IP, PROFINET*, and Modbus/TCP protocols for 

device management and monitoring

›

›

›

›

›

›

to connected high-power devices when AC power is not readily 
available or is cost-prohibitive to provide locally. The EDS-P506A-
4PoE series series is designed especially for security automation 
applications such as IP surveillance, and gate of entry systems, which 
can benefit from a scalable backbone construction and Power-over-
Ethernet support.

•  Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 

switches), RSTP/STP, and MSTP for network redundancy

•  IGMP snooping and GMRP for filtering multicast traffic
•  Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network 

planning

•  QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
•  Port Trunking for optimum bandwidth utilization
•  TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance 

network security

*Available in Q4, 2013

Standards: 
IEEE 802.3af/at for Power-over-Ethernet 
IEEE 802.3 for 10BaseT 
IEEE 802.3u for 100BaseT(X) and 100BaseFX 
IEEE 802.3x for Flow Control 
IEEE 802.1D-2004 for Spanning Tree Protocol 
IEEE 802.1w for Rapid STP 
IEEE 802.1s for Multiple Spanning Tree Protocol 
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1p for Class of Service 
IEEE 802.1X for Authentication 
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, 
RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, PROFINET* 
Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP V2, IPv6, NTP 
Server/Client
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, 
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control

*Available in Q4, 2013

Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 8 K
Packet Buffer Size: 1 Mbit

Fiber Ports: 100BaseFX ports (SC/ST connector)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex 
mode, and auto MDI/MDI-X connection
PoE Pinout: V+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative 
A)
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/
TAIL, PoE
Alarm Contact: 2 relay outputs with current carrying capacity of 1 A @ 
24 VDC
Digital Inputs: 2 inputs with the same ground, but electrically isolated 
from the electronics. 
• +13 to +30V for state “1”