Техническая Спецификация для PeakOptical PGBIC-15215SF
Data Sheet
1.25Gb/s, Hot Pluggable, Duplex SC, +5V, 1550nm DFB,
Single-Mode Gigabit Interface Converters Transceiver
PGBIC-15215SF
PGBIC-15215SF
Issue: October 2008
All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to availability. Any liability
that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective
manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.
that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective
manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner.
Copyright © PeakOptical Technology A/S 2008-2010. Published at www.peakoptical.com
Features:
1550nm DFB, Single-Mode
Single +5V Power Supply
Duplex SC Connector, Hot-Pluggable
Data Rate: 1.25Gb/s, NRZ
Eye Safety, Designed to Meet Laser Class1, Compliant with IEC60825-1
Compliant with Gigabit Interface Converter Specification Rev.5.5(1)
Compliant with Specifications of IEEE-802.3
Compliant with ANSI Specifications for Fiber Channel Applications at 1.06Gb/s
RoHS Compliant Parts
Applications:
Gigabit Ethernet (1000Base-ZX) Links at 1.25Gb/s
Fiber Channel Links at 1.06Gb/s
High Speed I/O for File Servers
Switch to Switch Interface
Description:
PeakOptical®’s PGBIC-15215SF Transceiver is a high performance and cost effective module for serial
optical data communication applications. The interface converters meet the GBIC Standard Rev.5.5.
This module is designed for Single-Mode fiber and operates at the wavelength of 1550nm. The
transmitter section incorporates an advanced DFB for Single-Mode, with temperature compensation
and automatic power control circuit (APC). The receiver section incorporates an efficient InGaAs/InP
PIN photodiode, with AGC for wide dynamic range.
The family is a duplex SC transceiver designed for Gigabit Ethernet use and provides an IEEE-802.3
compliant link at 1.25Gb/s applications. The modules are hot-pluggable, the characterization is
performed in accordance with Bellcore specification TA-NWT-000983. All of them are housed in a
stainless package and the combination produces a component of high reliability.
Specifications:
Electrical and Optical Characteristics: (Condition: T
a
=T
OP
)
Electrical Characteristics:
Parameter
Symbol
Min.
Typical
Max.
Unit
Transmitter Differential Input Voltage
+/-TX_DAT
650
2000
mV p-p
Supply Current
I
CC
200
250
mA
Tx_Disable Input Voltage - Low
V
IL
0
0.8
V
Tx_Disable Input Voltage - High
V
IH
2.0
Vcc
V
Tx_Fault Output Voltage - Low
V
OL
0
0.8
V
Tx_Fault Output Voltage - High
V
OH
2.0
Vcc
V