Справочник Пользователя для Wilson Electronics 304453
Signal Booster Specifications
AG Pro Quint Selectable
Model Number
273470
Antenna connectors
N-Female
Antenna Impedance
50 Ohms
Dimensions
8 .875 x 6 .0 x 1 .5 inch (22 .5 x 15 .2 x 3 .8 cm)
Weight
2 .8 lbs (1 .270 kg)
Frequency
698-746 MHz / 746-787 MHz / 824-894 MHz / 1850-1990 MHz / 1710-2155 MHz
3
Power output for single cell phone (dBm)
700 A MHz
700 V MHz
800 MHz
1900 MHz
1700/2100 MHz
Uplink
Downlink
29 .1
23 .7
28 .4
23 .7
29 .1
22 .7
29 .1
22 .8
27 .1
22 .8
Noise Figure (typical downlink/uplink)
5 dB nominal
Isolation
> 90 dB
Power Requirements
110-240 V AC, 50-60 Hz, 20 W
Notes: 1 . Nominal gain is the maximum gain at any frequency in the passband .
2 . Nominal bandwidth is the difference between two frequencies that are adjacent to the passband where the amplification is 20 dB lower than the passband amplification . One of the frequencies is lower
than the passband and the other is higher .
3 . The Manufacturer’s rated output power of this equipment is for single carrier operation . For situations when multiple carrier signals are present, the rating would have to be reduced by 3 .5 dB, especially
where the output signal is re-radiated and can cause interference to adjacent band users . This power reduction is to be by means of input power or gain reduction and not by
an attenuator at the output of the device .
4 . The maximum power for 2 or more simultaneous signals will be reduced by 6 dB every time the number of signals is doubled .
111102_Rev01_09 .12 .12
3301 East Deseret Drive, St . George, UT 84790
For additional Technical Support visit www .WilsonElectronics .com
or email at: tech@wilsonelectronics .com
Phone: 866-294-1660 Local: 435-673-5021 Fax: 435-656-2432
www .twitter .com/WilsonCellular www .facebook .com/WilsonCellular
About Wilson Electronics
Wilson Electronics, Inc . has been a leader in the wireless communications industry for over
40 years . The company designs and manufactures Signal Boosters, antennas and related
components that significantly improve cellular telephone signal reception and transmission in
a wide variety of applications, both mobile (marine, RV, vehicles) and in-building (home, office,
M2M) .
With extensive experience in antenna and Signal Booster research and design, the company’s
engineering team uses a state-of-the-art testing laboratory, including an anechoic chamber
and network analyzers, to fine-tune antenna designs and performance . For its Signal Boosters,
Wilson Electronics uses a double electrically shielded RF enclosure and cell tower simulators
for compliance testing .
Wilson Electronics Signal Boosters feature patented Smart Technology ™ that enables
them to automatically adjust their power based on cell tower requirements . By detecting
and preventing oscillation (feedback), signal overload and interference with other users,
these Smart Technology ™ Signal Boosters improve network cell phone areas without
compromising carrier systems .
All products are engineered and assembled in the company’s 55,000-square-foot headquarters
in St . George, Utah . Wilson Electronics has product dealers in all 50 states as well as in
countries around the world .