Справочник Пользователя для Cisco RPS Field Upgrade for the Cisco 2600 Series ACS-2600RPS=
Модели
ACS-2600RPS=
Copyright © 2000 Cisco Systems, Inc. All Rights Reserved.
Page 3 of 4
The standard quasi-redundant DC power cable works with all
external devices but the 2500 Series (four of the cables are
included with PWR600-AC-RPS-CAB). The standard DC power
cable is called a “22-to-18” cable because it has a 22-pin
connector on the RPS end and an 18-pin connector on the external
device end. The Cisco 2500 Series requires a “22-to-8” DC power
cable. This cable is not included with the Cisco 2500 field upgrade
kit and must be ordered separately.
For supporting external devices in fully redundant mode,
optional cables must be ordered separately. These cables are
referred to as two-to-one cables because there are two connectors
for the RPS end and one for the load end. There is an 18 pin
version of the two-to-one DC power cable and an 8 pin version
(for the 2500 Series). The two-to-one cables are not supported on
hubs and switches.
External Device
Quasi-Redundan
t
Fully Redundant
Redundant with
Reboot *
FastHub 400 Series 10/100 hubs
Yes
No
Yes
Cisco 1516-M hub (HP 10Base-T Hub-16-M)
Yes
No
No
Catalyst 1900 Series switches
Yes
No
Yes
Catalyst 2820 Series switches
Yes
No
Yes
Catalyst 2900 Series XL switches
Yes
No
Yes
Catalyst 3500 Series XL switches
Yes
No
Yes
Cisco 2500 Series routers and access servers
Yes
Yes
No
Cisco 2600 Series routers and access servers
Yes
Yes
No
Cisco 3600 Series routers
Yes
Yes
No
Cisco 3725 Series routers
Yes
Yes
No
Cisco MC3810 Multiservice access concentrator
Yes
Yes
No
Cisco 4000 Series routers
Yes
Yes
No