Справочник Пользователя для Metra 95-7895
2
95-7895 KIT ASSEMBLY
B
A
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/trim plate assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure B)
stacked ISO head units into the
bracket/trim plate assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure B)
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
3
Reassemble dash in reverse order of
disassembly.
disassembly.
4
*
Note: Refer also to the instructions included with the aftermarket radio.
Attach the Double DIN brackets to the
edge of the Double DIN trim plate.
(Figure A)
edge of the Double DIN trim plate.
(Figure A)
1