Справочник Пользователя для Huawei NX112 03030MXK
Модели
03030MXK
2
Outstanding performance thanks to optimized architecture
Provides an 8U space for 10 server blades and optimized layout for fan modules, PSUs,
•
switch modules, and management modules, which achieves a good balance between
computing density and power consumption and maximizes space utilization.
Supports server blades such as the BH620 V2, BH621 V2, and BH622 V2 that use
computing density and power consumption and maximizes space utilization.
Supports server blades such as the BH620 V2, BH621 V2, and BH622 V2 that use
•
Intel
®
Xeon
®
E5 series processors, which meets low-end, mid-range, and high-end
customer requirements.
Supports up to six switch modules, such as GE switch modules, FC switch
Supports up to six switch modules, such as GE switch modules, FC switch
•
modules, or pass through modules.
High efficiency and energy-saving
Uses highly efficient AC or DC PSUs to centrally supply 12 V DC power, achieving
•
up to 92% power efficiency and reducing losses from power conversion.
Supports energy-saving technologies, such as power capping, power alternate
Supports energy-saving technologies, such as power capping, power alternate
•
hibernation, and intelligent fan speed adjustment by area.
Adopts dedicated system air ducts and an area-based thermal design to improve
Adopts dedicated system air ducts and an area-based thermal design to improve
•
cooling efficiency.
High reliability
Uses fan modules in N+1 redundancy mode and PSUs, switch modules, and
•
management modules in N+N redundancy mode, supporting load balancing and
seamless failover.
Uses a passive backplane to prevent single point of failures, ensuring high reliability
seamless failover.
Uses a passive backplane to prevent single point of failures, ensuring high reliability
•
and service continuity.
Easy maintenance and management
Complies with IPMI V2.0 and provides functions such hardware monitoring, alarm
•
generation, and log recording and querying.
Supports SOL, KVM over IP, WebUI, and virtual media.
Supports SOL, KVM over IP, WebUI, and virtual media.
•
Supports a variety of protocols, including the SNMP v3, SNMP Trap v1, SSL, SSH,
•
RMCP, and RMCP+.
Uses Zero Touch–based remote maintenance for startup, shutdown, and reset to
Uses Zero Touch–based remote maintenance for startup, shutdown, and reset to
•
reduce O&M costs.
HUAWEI Tecal E6000 Blade Server Chassis
(E6000 chassis)
The E6000 chassis is 8U high and features an
optimized layout structure to maximally use space.
It houses 10 server blades and redundant PSUs, fan
modules, management modules, and switch modules.
The E6000 chassis can be installed in a standard 19-
inch rack at a depth of at least 1000 mm. Two types
of E6000 chassis are provided: AC and DC.
optimized layout structure to maximally use space.
It houses 10 server blades and redundant PSUs, fan
modules, management modules, and switch modules.
The E6000 chassis can be installed in a standard 19-
inch rack at a depth of at least 1000 mm. Two types
of E6000 chassis are provided: AC and DC.
Technical Specifications
Form factor
8U blade server chassis
Server blades
10 slots for HUAWEI BH series server blades
Switch module
Up to 6 switch modules:
NX910 GE pass through module
•
NX120 4G FC switch module
•
NX112 10GE uplink switch module
•
NX113 10GE uplink switch module
•
PSU
Up to 6 hot-swappable PSUs:
AC: 1600 W
•
–48 V DC: 1300 W
•
Redundancy: N+N or N+M
Redundancy: N+N or N+M
Fan module
9 hot-swappable fan modules in N+1 redundancy mode
Management
2 management modules in 1+1 redundancy mode
Supported protocols: IPMI 2.0, SOL, SSL, and SSH
Supports CLI, IPMITools, RMCP+, and Web for management
Supported protocols: IPMI 2.0, SOL, SSL, and SSH
Supports CLI, IPMITools, RMCP+, and Web for management
Power supply
110 V/220 V AC or –48 V DC
Operating temperature
5ºC to 35ºC
Dimensions
Height: 353 mm (13.90 in.)
Width: 447 mm (17.60 in.)
Depth: 810 mm (31.89 in.)
Width: 447 mm (17.60 in.)
Depth: 810 mm (31.89 in.)