Листовка для Arkon GN097-USB

Safety Precautions
Do not install Arkon products over an air bag cover or within the air 
bag deployment zone.  Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or      
air bag deployment. 

Arkon is not responsible for any damages caused to your car, your 
device, or yourself due to the installation or use of this pedestal mount.

Arcadia, CA 91006 USA

Designed in USA | Made in Taiwan

© Copyright 2009 Arkon Resources, Inc.

Consumer Hotline:
USA     (800) 841-0884
INT’L    (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

Package Contents:
(1) GN097-USB - 12V / Lighter socket mount with USB power outlet 

Do not place mount in or near an air bag deployment 
zone or where it will obstruct view of the road.

GN097-USB 
Lighter socket mount
for Garmin

Insert the DC Power plug (A) completely into the vehicle’s 

12V / lighter socket.

Adjust the angle of the pedestal arm by tightening the 

adjustment knob (B) to the desired placement angle.

If necessary, adjust the rotation of the mounting head by 
tightening the screw (C) with a screwdriver. 

Adjust the angle of the 17mm ball by tightening the wing 

nut (D) to the desired mounting angle. 

Step 1. 

Step 2. 

Step 3. 

Step 4.

Attach the USB power connector to the device or cradle 
(not included) before inserting the mount ball into the 
Garmin device.

Note: The mini USB power connector will only power / 
charge your device.  Inserting the power connector in a 
mini USB sync port (if it has one) will not provide power 
to the device. 

Carefully insert the ball into the cavity of your Garmin 
device or cradle.  Rotate and adjust angles as needed.

Step 1.

Step 2.

(Device sold 
separately)

Specs: Input (12V - 24V) outlets, Output (5V, 500mA)

Make sure the power mentioned in the specs is compatible 
with your device prior to use.