Листовка для Thecus Silver Data Storage 4 bays N4100S
Модели
N4100S
Thecus N4100 IP Storage Appliance
50
Hard Drive Replacement
You can easily replace a damaged hard drive in the Thecus N4100, and your data is secure with the
system’s automatic data recovery, provided you are using a RAID 1 or RAID 5 setting.
Hard Drive Damage
When a hard drive is damaged, its bottom LED glows a steady red. If there is data in the RAID volume, then
the system LED also glows red, and the system beeps.
Replacing a Hard Drive
Replace a hard disk drive (HDD) as follows:
1. Remove the tray with the damaged HDD.
2. Unscrew the damaged HDD from the tray and put it aside.
3. Slide the new HDD into the tray and fasten the screws.
4. Insert the HDD and tray back into the Thecus N4100 until it snaps into place and lock it with a key if
desired.
5. The LED blinks green when the HDD is accessed. If the Error LED flashes red it signals a problem.