Техническая Спецификация для Cisco Aironet 1530 AIR-CAP1532I-E-K9

 

 

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 2 of 9 

The innovatively designed Cisco Aironet 1530E Outdoor Access Point is designed with antenna Cisco Flexible 

Antenna Port technology, which can support either dual-band or single-band antennas on the same platform and is 

configurable via software. When configured for dual-band ports, the Aironet 1530E uses the bottom two antenna 

ports to connect to dual-band omnidirectional or directional antennas. Alternatively, and for additional radio 

coverage flexibility, the Aironet 1530E can be software-configured, enabling two separate 2.4-GHz and two 5-GHz 

antenna ports (Figure 2). This flexibility allows customers to use high-gain directional antennas for backhaul on 5 

GHz while deploying omnidirectional antennas for access on 2.4 GHz. Refer to the Cisco Aironet 1530 Series 

Ordering Guide for the latest information on supported antennas. 

Cisco Aironet 1530E with Flexible Antenna Port Antenna Technology 

 

Flexible, High-Performance 

The Cisco Aironet 1530 Series Outdoor Access Points offer a flexible, highly secure, and scalable platform that is 

part of the 

 and the Cisco Service Provider Wi-Fi solution. The Cisco Aironet 1530 

Series provides high-performance device access through improved radio sensitivity and range with 802.11a/b/g/n 

multiple-input multiple-output (MIMO) technology, with two or three spatial streams and up to 300-Mbps data rates. 

Carrier-grade design allows service providers to take advantage of Wi-Fi for next-generation mobile data offloads. 

The Aironet 1530 Series can be deployed in the following configurations: 

● 

Access point: Either in controller-based or standalone operation, provides Wi-Fi connectivity concurrently to 

clients on both 2.4-GHz and 5-GHz radios. 

● 

Mesh network: as dedicated backhaul or universal access, the 5-GHz radio is used for wireless network 

connections to adjacent mesh nodes. 

● 

Bridging: Provides point-to-point, high-capacity data links, as well as point-to-multipoint bridging for 

campuses. 

● 

Workgroup bridge: Enables LAN mobility, such as on a vehicle. 

● 

Serial backhaul: Extends linear mesh with two colocated Aironet 1530 Series access points connected via 

the LAN port (Figure 3).