Листовка для Gefen GTB-DPKVM-3CAT7-BLK

Скачать
Страница из 1
Extend DisplayPort and USB over three CAT-7 cables up to 
100 feet (30 meters)
The DisplayPort KVM Extender over CAT-7 allows the installation of a 
Hi-Def display, keyboard, mouse, and other USB peripherals up to 
100 feet (30 meters) away from a computer, using two or three CAT-7 
cables. Resolutions up to 1920 x 1200 (WUXGA) or 1080p Full HD 
when using two CAT-7 cables, and up to 2560 x 1600 (WQXGA) 
when using three cables can be supported. HDCP is also supported. 
When using USB 2.0, 480 Mbps data rates are supported. 
This extender is also backward compatible with USB 1.1.
How It Works
Connect the included DisplayPort cable from the computer to the 
DisplayPort input of the Sender unit. Connect the included USB cable 
from the computer’s USB Host Interface port to the Sender unit. 
Connect the Receiver unit to a Hi-Def display using a DisplayPort 
cable. Connect a keyboard, a mouse, or another USB peripheral to 
the two USB ports on the Receiver unit. Connect the Sender unit to the 
Receiver unit using two or three CAT-7 cables, depending on the 
maximum required video resolution. First, connect the supplied 5V DC 
power supplies with locking connectors to the Sender and Receiver 
units. Then, connect them to available electrical outlets. Turn on the 
power to the computer, the display, and any connected USB device 
that is externally powered.
Note: This product extends DisplayPort video only. It does not 
support audio.
Features*
•  Extends DisplayPort and USB up to 100 feet (30 meters)
•  Supports resolutions up to 2560 x 1600 and USB over three 
    CAT-7 cables, and up to 1920 x 1200 or 1080p Full HD at 120Hz and
    USB over two CAT-7 cables
•  HDCP compliant
•  Supports DisplayPort 1.1a
•  Supports USB 2.0 at 480 Mbps 
•  Backward-compatible with USB 1.1
•  16-position EQ rotary switch to compensate for cable skew
•  HPD Auto-Calibration button
•  Pre-emphasis switch
•  Drive level switch
•  Boost level switches
•  Power On indicator
•  Independent DisplayPort and USB Link indicators
•  Locking power supplies
•  Surface-mountable
•  Available in Black and White
Specifications*
•  Video Data Rate: up to 2.7 Gbps
•  Video Input Connector (Sender): (1) DisplayPort, 20-pin, female
•  Video Output Connector (Receiver): (1) DisplayPort, 20-pin, female
•  USB Connector (Sender): (1) Type B, female
•  USB Connector (Receiver): (2) Type A, female
•  Link Connectors (Sender/Receiver): (3) RJ-45, shielded
•  EQ Switch (Receiver): (1) 16-position rotary type
•  HPD Auto Calibration button (Receiver): (1) tact-type
•  Pre-emphasis switch (Sender): (1) 3-position DIP switch
•  Drive level switch (Sender): (1) 3-position DIP switch
•  Boost level switch (Sender): (2) 3-position DIP switch
•  Power On indicator (Sender): (1) LED, blue
•  DisplayPort Link indicator (Receiver): (1) LED, green: good link, red: no link
•  USB Link indicators (Sender/Receiver): (1) LED, green
•  Power Supply connector (Sender/Receiver): 5V DC, locking type
•  Operating Temperature: +32 to +104 °F (0 to +40 °C)
•  Dimensions (W x H x D) (Sender/Receiver): 3.4" x 1.2" x 5.8"
                                                   (85mm x 30mm x 146mm)
•  Shipping Weight: 2.5 lbs (1.1 kg)
GTB-DPKVM-3CAT7-BLK
DisplayPort KVM Extender over CAT-7
up to 100 feet (30 meters)
* Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners.
X13
Gefen, LLC   |  20600 Nordhoff Street, Chatsworth CA 91311  |  Tel. (818) 772-9100   (800) 545-6900  |  Fax (818) 772-9120  |  www.gefentoolbox.com
GTB-DPKVM-3CAT7
Sender
Receiver
A4