Листовка для Black Box IC821A
BLACK BOX
®
1 of 1
Universal RS-232 to RS-422/RS-485 Converter, Opto-Isolated
This device is perfect for
multiple serial conversions—
plus it’s opto-isolated.
04/13/2010
#26796
FeaTures
»
Converts RS-232 to 4-wire RS-422 or to 2- or 4-wire
RS-485.
»
Bidirectional data conversion.
»
Select RS-485 2-wire half-duplex or RS-485 4-wire
full-duplex operation.
»
Optically isolated circuits protect it from overvoltage
damage caused by ground loops, surges, and spikes.
»
RS-422 operation with transmit and receive always
enabled.
»
Set operating mode with four switches.
»
Automatic RS-485 driver control, so it works without
any special programming for handshaking signals.
Also enables transmitter from RS-232 TD signal and
receiver when not transmitting.
Also enables transmitter from RS-232 TD signal and
receiver when not transmitting.
»
Built-in bridging switches for 2- or 4-wire operation
with no external jumpers to set.
»
Converts using either port power or power from
an external 120-VAC/12-VDC power supply (PS1003,
ordered separately). No external power is required
if two RS-232 output handshake lines are available.
ordered separately). No external power is required
if two RS-232 output handshake lines are available.
T e c h S p e c S
Interface — RS-232, 4-wire RS-422, or 2- or 4-wire RS-485
Connectors — (1) DB9 female; (1) 5-wire connector for TD A(-), TD B(+),
RD A(-), RD B(+), and GND; (1) 2-wire connector for Power and GND
Indicators — (2) LEDs: (1) TD, (1) RD
Power — From the interface or from optional 120-VAC/12-VDC wallmount
power supply
Size — 1.7"H x 3.9"W x 0.9"D (4.3 x 9.8 x 2.3 cm)
Weight — < 0.1 lb. (< 0.1 kg)
Item
Code
Universal RS-232 to RS-422/RS-485 Converter, Opto-Isolated
IC821a
For an optional power supply, order…
120-VAC/12-VDC Wallmount Power Supply
Ps1003