Справочник Пользователя для Digitus Multifunction Ethernet Print Server DN-13007

 
 

4.  Select the desired printer driver and click Set Port to Printer. 

 

 

 

5.  If you can not find any printer driver in Printer List, please install your printer 

driver first or click Add New Printer to install the printer driver. 

 

Windows Platform: Windows 2000, XP and 2003 

1.  Open Printers and Faxes  
2.  Right-click the printer for which you want to change settings, and then click 

Properties 

3.  Clear Enable bidirectional support and click Add port, and then click 

Standard TCP/IP Port from the dropdown and click New port. 

4.  The "Add Standard TCP/IP Printer Port Wizard" will pop up and click Next. 
5.  In the Printer Name or IP Address box, type Host Name of the MFP server 

(default: DN-13007) or IP address of MFP server. In the Port Name box, type 
USB1_RAW or USB2_RAW for printer connected to USB1 port and USB2 port, 
respectively.  

# 

  If your server is running on a different LAN than your Windows PC such 

Internet PC, you must type server’s IP address in Printer Name or IP 
Address box. 

6.  Click Next.         
7.  Click Custom/settings. 
8.  The click Settings and confirm that the settings are as below. The default Port 

Number values are 9100, 9101 for USB port 1 and USB port 2, respectively. 
Refer to server’s web pages or MFP Server Control Center tool, you can get 
exact values. Click OK. 

 

23