Справочник Пользователя для Digitus Multifunction Ethernet Print Server DN-13007

 
 

 

 
This chapter describes how to add network printers to Unix/Linux PC. 
 

 

If using IP administration system like DNS, manually registering the Host Name and IP 
address may be not required. Otherwise, you have to edit hosts file and contact your 
network administrator. 
 

1.    Log in to Linux machine by “root”.   

2.  Register Digitus DN-13007 MFP server’s Host Name and IP address to /etc/hosts 

file.  
To edit host file, use an editor, e.g. “vi”.   
Example: The IP address is “192.168.1.100”, Host Name is “DN-13007”   
192.168.1.1 dns # DNS Server 
192.168.1.2 mail # Mail Server   
192.168.1.100 DN-13007 # MFP-Server 
 

3.  Switch on the MFP server. Verify the network connection by using ping 

command.  
# ping DN-13007   
If there is no response or error is indicated, there may be problems with IP 
address configuration, host file editing or network status. Please contact your 
network administrator.   

 

 

This section explains how to print using LPD protocol of TCP/IP.   
For further information on “lpr” and “lp” commands, refer to your workstation manual. 
   
LPD Protocol:    LPD (Line Printer Daemon) is a protocol that enables you to execute 
printing to a printer on the network.   
 
Remote-Printer Queue: Digitus DN-13007 has two remote printer queues USB1_LQ 
and USB2_LQ with respect to USB port 1 and UB port2.   
To print files using a printer driver, use “lp” or “lpr”. 
 

1.  Log in to the BSD Unix machine through “root”. 

2.  Register the Digitus DN-13007 MFP server to /etc/printcap file. 

Example: To register the printer of USB1 port by the printer name “Printer1”. 
Printer1:\ ---(A) 

 

32