Справочник Пользователя для Digitus Multifunction Ethernet Print Server DN-13007

 
 

 

 

The network connector of this Server is designed for 10 Mbps or 100 Mbps Ethernet 
networks and connects to the network via a twisted pair category 5 cable (10baseT 
and 100baseTX) or better.   
 

This Server has two USB host ports which are USB 1.1/2.0 low, full, and high speed 
compliant and successfully tested with USB 1.1/2.0 printers, Mass Storage, and 
AIP/MFPs.  
 

The Init button is used for:   

„ 

performing a Factory Default of the Server, which will restore most of the 
parameters and settings to factory default values   

„ 

performing the new firmware upgrade using in fallback 

 

„ 

Power Indicator is lit while power is applied. If it is not lit, or if it blinks, there 
is a problem with MFP server or Power Adapter.   

„ 

Link Status is lit while network is applied. If it is not lit, it indicates that the 
server does not connect to network.   

„ 

Status Indicator blinks to indicate network activity. 

„ 

USB1 Indicator is lit while an USB device connects to USB1 Port of MFP server. 
If it is not lit, or if it blinks, there is a problem with the USB device or the MFP 
server. 

„ 

USB2 Indicator is lit while an USB device connects to USB2 Port of the MFP 
server. If it is not lit, or if it blinks, there is a problem with the USB device or 
the MFP server. 

 

5