Справочник Пользователя для Digitus Multifunction Ethernet Print Server DN-13007

 
 

following methods, depending on your network operating environment:   
 

„ 

Automatic IP Address Assignment   

 

„ 

Manual IP Address Assignment   

 

The Host Name of the Server is specified by “DN-13007”in Factory Parameter. If you 
put two or more MFP servers in your local area network, to avoid using same Host 
Names you have to change the Host Names by using MFP Server Control Center or 
server’s web pages. If your Host Name is longer than 15 characters, Digitus DN-13007 
USB MFP server limits the length of Host Name to 15 characters.   
 

Follow the instructions below to get an IP address using DHCP:   
 

1.  Edit or create a scope in the DHCP manager of the DHCP daemon. The entries 

included in this scope should contain the following parameters:   

y 

range of IP addresses   

y 

subnet mask   

y 

default router IP address   

y 

DNS server IP address   

y 

lease duration   

 

2.  Activate the scope. The MFP server automatically gets the DHCP parameters. If 

you are using DNS, you may include at least one DNS server IP address in the 
DHCP scope or manually set DNS server IP in MFP server’s web pages or MFP 
Server Control Center tool.   

 

 

1.  Install MFP Server Control Center. MFP Server Control Center is available in the 

Digitus DN-13007 USB MFP Server Product CD. 

 
2.  Start MFP Server Control Center and Auto-searching MFP server window will 

appear. 

 

 

 

3.  If the tool finds MFP servers in your local area network, then you have to select 

a MFP server from the server list.   

 

 

9