Листовка для Vantec UGT-PCE20PL
Compliant with PCI Express Base Specification 1.1
Supports x1, x4, x8, x16 PCI Express
Add two IEEE 1284 Parallel Ports on system
Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced
Capability Port (ECP)
Faster data rates up to 1.5Mbytes/sec
Plug-n-Play, I/O address and IRQ assigned by BIOS
Support Windows XP/Vista/7/8
Supports x1, x4, x8, x16 PCI Express
Add two IEEE 1284 Parallel Ports on system
Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced
Capability Port (ECP)
Faster data rates up to 1.5Mbytes/sec
Plug-n-Play, I/O address and IRQ assigned by BIOS
Support Windows XP/Vista/7/8
This UGT-PCE20PL is part of a series of I/O card based on the PCI Express technology. It offers TWO LPT port that enables
the user to connect parallel devices. The Parallel (LPT) port offer data transfer rate up to 1.5 Mbps with built-in
ECP/EPP/SPP/BPP auto switching operation modes to give you maximum system performance and efficiency via DB25
pin female connector. This card is the best solution for your Centronics peripherals. The UGT-PCE20PL is design to be
easy and simple to use for commercial, office and home use. This card is designed to meet PCI Express Specification and
with the standard or low profile brackets can be installed virtually in any PC with all major operating systems. The I/O
address and IRQ are automatically configured to simplify the installation at the same time offers a reliable and high
performance solution for Parallel Communication.
the user to connect parallel devices. The Parallel (LPT) port offer data transfer rate up to 1.5 Mbps with built-in
ECP/EPP/SPP/BPP auto switching operation modes to give you maximum system performance and efficiency via DB25
pin female connector. This card is the best solution for your Centronics peripherals. The UGT-PCE20PL is design to be
easy and simple to use for commercial, office and home use. This card is designed to meet PCI Express Specification and
with the standard or low profile brackets can be installed virtually in any PC with all major operating systems. The I/O
address and IRQ are automatically configured to simplify the installation at the same time offers a reliable and high
performance solution for Parallel Communication.
Introduction:
Specifiactions:
System Requirement
Package Contents
Send us an e-mail at: inquiry@vantecusa.com
All Registered Trademarks Belong To Their Respective Companies Copyright © 2013 Vantec Thermal Technologies. All Rights Reserved.
www.vantecusa.com
Model:
Interface:
Ports:
Dimensions:
Interface:
Ports:
Dimensions:
UGT-PCE20PL
PCIe
2 Parallel Ports (DB25 Female)
83 x 70 x 18mm
PCIe
2 Parallel Ports (DB25 Female)
83 x 70 x 18mm
Windows XP/Vista/7/8 (32/64 bit)
One available PCI Express slot
1 x 2-Port Parallel PCIe Host Card
1 x Driver CD
1 x User Manual
1 x Bracket with one DB25 female parallel port
2 x Low Profile Brackets
2-P
or
t P
ar
allel PCIe