Справочник Пользователя для Philips DVP3355V DVP3355V/F7

– 18 

–

–

EN

•  If you have not set the clock, “CLOCK SET” menu will appear at step 2. Refer to “Clock Setting” on page 12.
•  You cannot set the ending time for the satellite link timer recording on this Unit.
•  Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.
•  When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

Set the desired start minutes.

If you wish to go back to the left, press [s ].

Press [B] to set satellite link standby mode.

•  TIMER REC indicator on this Unit lights up and the Unit goes to

the DVD mode. If you do not use DVD function, turn off the Unit.

• Satellite Unit must be turned on for VCR satellite link to start.

If an External Tuner (Cable/Satellite or Converter Set-top Box) is

not set to output signals, satellite link will remain in standby mode.

Press [TIMER SET] on the Remote Control or 

[STOP/EJECT C A] on this Unit.

Press [STOP/EJECT C A] on this Unit.

Warning:  Unauthorized recordings of copyrighted cassette tapes

may be an infringement of copyright laws.

1)  Insert a pre-recorded cassette tape into another external

device for playback.

2)  Insert a recordable cassette tape into this Unit for recording.

3) Press [SPEED] on the Remote Control to select recording 

speed (SP or SLP).

4) Press [INPUT] on the Remote Control to select L1 or L2.

Choose L1 if device is connected to rear input jacks or L2 if 

connected to the front input jacks. Refer to

“

Front & Rear 

Terminals

”

 on page 13 for more details.

5) Press [REC] on the Unit.

6)  Press “PLAY” button on the external device.

7)  To stop recording, press [STOP/EJECT C A] on this Unit, 

then stop playback of the external device.

• For best results during dubbing, use buttons on this Unit whenever 

possible. The Remote Control might affect another device’s operation.

• Always use video-quality shielded cables with RCA-type connectors. 

Standard audio cables are not recommended.

• L2 input jacks are on the front of this Unit.
• Please purchase the necessary cables at your local store. (Refer to page 11.)

Press [SPEED] to select the desired tape speed.

In Stop mode, press [SETUP].

Select “SATELLITE LINK”.

Then press [B] to go to next step.

Set the desired start hour.

Then press [B] to go to next step.

• The hour can be selected from 1-12 with AM or PM.

•  When the External Tuner (Cable/Satellite or Converter Set-top Box)

signal is stopped, recording will be stopped.

             - M E N U -

 TIMER 

PROGRAMMING

B SATELLITE LINK

 AUTO 

REPEAT 

[OFF]

 CLOCK 

SET

 LANGUAGE 

SELECT

SATELLITE LINK

0 1  :  3 0   PM

[ON]

e.g.) In case the timer recording is programmed in the middle
         of the satellite link timer recording

timer recording

recording result

satellite link

e.g.) In case the timer recording is overlapped on the existing

        satellite link timer recording.

timer recording

recording result

satellite link

e.g.) In case the satellite link timer recording is overlapped
         on the existing timer recording.

timer recording

recording result

satellite link

or

or

•  Satellite link accepts only the connection from L1 (rear) with the 

External Tuner (Cable/Satellite or Converter Set-top Box). (The 

connection from L2 cannot read any signals from the External Tuner.)

• The External Tuner (Cable/Satellite or Converter Set-top Box) should 

be equipped with some kind of timer function. Using timer function for 

the tuner, set it to output audio/video signals when it comes to the time

you want to start recording and to stop an output of audio/video signals 

when it comes to the time you want to finish the recording. Refer to 

the External Tuner’s manual on how to set the timer.

• Make sure to turn off the External Tuner when you finish setting it up.

SP

T60

T120

T160

   SP mode

1hour

2hours

2-2/3hours

   SLP mode

3hours

6hours

8hours

SATELLITE LINK

1 2  :  0 0   AM

You can set the Unit to start recording whenever it detects a video signal from the External Tuner (Cable/Satellite or Converter Set-top Box).

External Tuner

(Cable/Satellite or 

Converter Set-top Box)

RCA audio/video cables

L1

or

output jacks of 

external device

rear of the Unit

RCA audio/video 

cables

L1

You can use a video disc player, Cable/Satellite Set-top Box or other audio/

video component with audio/video output jacks.

SATELLITE LINK

0 1  :  0 0   PM

or

• Please purchase the necessary cables at your local store. (Refer to page 11.)