Техническая Спецификация для Cisco AIR-CAP702I-S-K9
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 7
Item
Specification
Available Transmit
Power Settings
Power Settings
2.4 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
5 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
specific details.
Integrated Antenna
● 2.4 GHz, gain 3.0 dBi, horizontal beamwidth 360°
● 5 GHz, gain 5.0 dBi, horizontal beamwidth 360°
● 5 GHz, gain 5.0 dBi, horizontal beamwidth 360°
Interfaces
● 10/100/1000BASE-T autosensing (RJ-45)
● Management console port (RJ-45)
● DC power connector
● Management console port (RJ-45)
● DC power connector
Indicator
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors
Dimensions
(W x L x H)
(W x L x H)
● Access point (without mounting bracket): 7 x 7 x 2 inches (177.6 x 177.6 x 50.4 mm)
Weight
● 1.06 lb (0.48 kg)
Environmental
Cisco Aironet 702i
● Nonoperating (storage) temperature: –22 to 158°F (–30 to +70°C)
● Nonoperating (storage) Altitude Test: 25°C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test: 40°C, 9843 ft.
● Nonoperating (storage) Altitude Test: 25°C, 15,000 ft.
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 90% percent (noncondensing)
● Operating Altitude Test: 40°C, 9843 ft.
System Memory
● 128 MB DRAM
● 128 MB flash
● 128 MB flash
Input Power
Requirements
Requirements
● 44 to 57 VDC
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
● Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz
Powering Options
● 802.3af Ethernet Switch
● Cisco Power Injectors (AIR-PWRINJ5=, AIR-PWRINJ4=)
● Cisco Local Power Supply (AIR-PWR-B=)
● Cisco Power Injectors (AIR-PWRINJ5=, AIR-PWRINJ4=)
● Cisco Local Power Supply (AIR-PWR-B=)
Power Draw
● 9.5W (maximum)
Note: When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount
dependent on the length of the interconnecting cable. This additional power may be as high as 1.3W, bringing the total
system power draw (access point + cabling) to 10.8W.
dependent on the length of the interconnecting cable. This additional power may be as high as 1.3W, bringing the total
system power draw (access point + cabling) to 10.8W.
Warranty
Limited Lifetime Hardware Warranty
Compliance
Standards
● Safety:
◦
UL 60950-1
◦
CAN/CSA-C22.2 No. 60950-1
◦
UL 2043
◦
IEC 60950-1
◦
EN 60950-1
● Radio approvals:
◦
FCC Part 15.247, 15.407
◦
RSS-210 (Canada)
◦
EN 300.328, EN 301.893 (Europe)
◦
ARIB-STD 33 (Japan)
◦
ARIB-STD 66 (Japan)
◦
ARIB-STD T71 (Japan)
◦
AS/NZS 4268.2003 (Australia and New Zealand)
◦
EMI and susceptibility (Class B)
◦
FCC Part 15.107 and 15.109