Справочник Пользователя для Motorola MBP28 B10700MBP28RU
Модели
B10700MBP28RU
16
PARENT UNIT SETTINGS
4.4
Sound alert
When the sound alert is set
ON
, and the parent unit
speaker volume is off, it will cause the parent unit to beep
and flash "Sound alert from Baby Unit x" on the display,
whenever the sound at the baby unit goes above a preset
threshold.
1. Press
and flash "Sound alert from Baby Unit x" on the display,
whenever the sound at the baby unit goes above a preset
threshold.
1. Press
1
to access the main menu.
2. Press
+
or
-
to select
SOUND ALERT
.
3. Press
1
and
+
or
-
to turn on or off the sound
alert.
4. Press
1
to confirm.
*The parent unit beeps only if the sound level at the
camera reaches a preset sensitivity level.
camera reaches a preset sensitivity level.
4.5
Alert tones
You can set the parent unit to give a warning when the
battery is low and/or if the radio link to the camera unit is
lost. When activated, an alert screen will be displayed on
the parent unit with an alert tone emitted simultaneously.
1. Press
battery is low and/or if the radio link to the camera unit is
lost. When activated, an alert screen will be displayed on
the parent unit with an alert tone emitted simultaneously.
1. Press
1
to access the main menu.
2. Press
+
or
-
to select
ALERT TONES
.
3. Press
1
and
+
or
-
to select
LOW BATTERY
or
NO LINK
.
4. Press
1
and
+
or
-
to turn on or off the alert tone.
5. Press
1
to confirm.
NOTE
When LCD is off, any alert message will turn on the LCD.
When LCD is off, any alert message will turn on the LCD.
4.6
Select camera unit
The system supports up to four camera units. You can
select any registered camera unit and view the picture
from that camera.
1. Press
select any registered camera unit and view the picture
from that camera.
1. Press
1
to access the main menu.
2. Press
+
or
-
to select
BU SELECTION
.
3. Press
1
and
+
or
-
to select the desired baby
unit or
ALL BABY UNITS
.
4. Press
1
to confirm. The parent unit will start to
connect with the selected camera unit, while the other
unit(s) will be in shutdown mode. The CAM x icon
(e.g.
unit(s) will be in shutdown mode. The CAM x icon
(e.g.
) will be shown on the status bar, when
displayed, where x is the baby unit number of the
selected camera unit.
selected camera unit.
When
ALL BABY UNITS
is selected, the screen of the parent
unit will automatically switch between all the registered
camera units, with each camera unit being selected in turn
at about 30 second intervals.
NOTE
Only registered camera unit(s) will be shown in the
selection list.
camera units, with each camera unit being selected in turn
at about 30 second intervals.
NOTE
Only registered camera unit(s) will be shown in the
selection list.