Справочник Пользователя для Olympus Creative Digital Camera SP-550 UZ ZWA SP550UZZWA

Модели
SP550UZZWA
Скачать
Страница из 96
EN   
25
Me
nu opera
tions
You can take a sequence of pictures at one time by holding down the shutter button. The camera 
will take pictures continuously until you release the shutter button.
• Only [o] is available when record mode is set to [RAW].
• Flash cannot be used when [
c] or [d(15fps)] is set.
• When [
c] is set, [IMAGE QUALITY] is limited to below [2048x1536] and the maximum number 
of pictures that can be taken for sequential shooting is approximately less than 15.
• When [
d(15fps)] is set, [IMAGE QUALITY] is limited to below [1280x960] and the maximum 
number of pictures that can be taken for sequential shooting is approximately less than 20. (This 
includes the 5 pictures stored shortly before shooting if [PRE-CAPTURE] is set to [ON].)
• If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [
c] and [d(15fps)] cannot be set.
When [
d(15fps)] is selected
• When [PRE-CAPTURE] is set to [ON], pressing the shutter button halfway stores 5 frames of a 
picture shortly before shooting.
When [BKT] is selected
DRIVE   ............................................................................................ 
Continuous shooting
o
Shoots 1 frame at a time when the shutter button is pressed.
j
Focus and exposure are locked at the first frame. The sequential 
shooting speed varies depending on the setting of image quality.
c
Pictures can be taken at a faster speed than normal sequential 
shooting.
d(15fps)
Sequential shooting at a speed of 15 frames/sec.
e
Adjusts the focus 1 frame at a time. The shooting speed is slower than 
for normal sequential shooting.
BKT
Takes pictures sequentially while changing the exposure for each 
frame. Focus and white balance are locked at the first frame.
PRE-CAPTURE
OFF /ON
Exposure differential
± 0.3 / ± 0.7 / ± 1.0
Number of frames
x3 / x5
• Press the shutter button completely and keep it pressed to shoot the 
preset number of pictures. You can stop shooting at any time by 
releasing the shutter button.
METERING   ................................  
Changing the area for measuring the brightness of a subject
ESP
Meters the brightness at the center of the monitor and the surrounding 
area separately to capture an image with balanced brightness. When 
taking pictures against strong backlight, the center of the picture may 
appear dark.
n
Only the center of the monitor is metered. Recommended for taking a 
picture against strong backlight.
4
Meters the brightness over a wide area with emphasis on the center of 
the screen. This method is used when you do not want to allow 
surrounding light to affect the picture.
OK
SET
MENU
BACK
BKT
0.7
1.0
0.3
×3
×5