Листовка для Dataram 32GB DDR3-1600 DRL1600LRQ/32GB
Модели
DRL1600LRQ/32GB
DRL1600LR
DDR3-1600, PC3L-12800L, ECC, 1.35V, 240-pin LRDIMM
DRL1600LR
24-Jun-14
Copyright
2014 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.
Products in Family
DRL1600LRQ/32G (1 x 32GB 4Rx4 LRDIMM)
DRL1600LR/64GB (1 x 64GB 4Rxr LRDIMM)
DRL1600LR/64GB (1 x 64GB 4Rxr LRDIMM)
Features
Description
240-pin JEDEC-compliant DIMM
133.35 mm wide by 30 mm high (1.181
133.35 mm wide by 30 mm high (1.181
” x 5.25”)
Data Transfer Rate: 12.8 Gigabytes/sec
Operating Voltage: 1.35V (1.28V~1.45V)
Backward compatible: 1.5V(1.425V~1.575V)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
Operating Voltage: 1.35V (1.28V~1.45V)
Backward compatible: 1.5V(1.425V~1.575V)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
The DRL1600LR/32G upgrade is a load reduced 4Gx72
memory module, which conforms to JEDEC's DDR3,
PC3L-10600L standard. The assembly is Quad-Rank.
The ranks are comprised of eighteen 2Gx4 DDP (Dual
Die Pack) DDR3 SDRAMs. One 2K-bit EEPROM is used
for Serial Presence Detect and an Isolation Memory
Buffer, which enables higher system memory bandwidth
at DDR3 speeds up to 1600 MT/s.
memory module, which conforms to JEDEC's DDR3,
PC3L-10600L standard. The assembly is Quad-Rank.
The ranks are comprised of eighteen 2Gx4 DDP (Dual
Die Pack) DDR3 SDRAMs. One 2K-bit EEPROM is used
for Serial Presence Detect and an Isolation Memory
Buffer, which enables higher system memory bandwidth
at DDR3 speeds up to 1600 MT/s.
Dataram Product
Dell Product
Product Description
DRL1600LRQ/32GB
DRL1600LR/64GB
DRL1600LR/64GB
SNPF1G9DC/32G
SNPG2K02C/64G
SNPG2K02C/64G
1 x 32GB 4Rx4 PC3L-12800L-11-11-CO
1 x 64GB 4Rx4 PC3L-12800L-11-11-CO
1 x 64GB 4Rx4 PC3L-12800L-11-11-CO
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]