Справочник Пользователя для Philips Epilator HP6483/00 HP6483/00

general information about epilation
Epilation is easier just after a bath or shower. Make sure your skin is 

completely dry when you start to epilate.

When you use the appliance for the first time, we advise you to try it 

out on an area with only light hair growth. This helps you get 

accustomed to the epilation process. 

For optimal epilation results, the hairs should not be longer than 

10mm. Use one of the following methods if the hairs are longer than 

10mm:

1  Shorten the hairs to a maximum length of 10mm with a trimmer. 

Afterwards you can immediately start with epilation.

2  Shave the hairs completely. Then you can start to epilate after a few 

days (minimum hair length 0.5mm necessary).

Your skin may become a little red and irritated the first few times you 

use the epilator. This phenomenon is absolutely normal and quickly 

disappears. As you use the appliance more often, your skin gets used 

to epilation, skin irritation decreases and regrowth becomes thinner 

and softer. If the irritation has not disappeared within three days, we 

advise you to consult a doctor.

We advise you to epilate before you go to bed at night, as this allows 

any skin irritation that may develop to diminish overnight.
Epilating with the cooling glove

Make sure your skin is clean, entirely dry and free from grease. Do not 

use any cream before you start to epilate.

 1 

 Insert the appliance plug into the bottom of the appliance and put 

the adapter in the wall socket.

  

 Put the ice gel pad in the compartment of the cooling glove with 

the transparent cover (Fig. 6).

Only use the ice gel pad in combination with the cooling glove.

  

 Push your hand into the cooling glove and start cooling the area 

you want to epilate (Fig. 7).

-

-

-

-

-

9