Справочник Пользователя для Geovision GV-MOUNT903
32
1. Assemble the camera with the dome housing. See
2.1 Assembling the Vandal Proof IP
Dome with the Dome Housing.
2. Assemble the tube (GV-Mount101, No. 2) and the tube connector (GV-Mount101, No. 3).
3. Thread the camera cable through the tube and assemble the tube to the end of the
housing cap (GV-Mount901, No. 2) with M6 screws (GV-Mount901, No. 4).
4. Thread the camera cable through the mounting bracket (GV-Mount101, No. 1) and
assemble the tube with the mounting bracket.
5. Make sure the tubes are properly screwed and tighten with the supplied torx wrench (GV-
Mount101, No. 4).
6. Secure the assembled camera to a desired location with 4 self-prepared screws.