Справочник Пользователя для Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102
Модели
052102
A
PRIL
2007
S
TORAGE
L
OADER
2U LTO
115
5
O
PERATING
THE
L
IBRARY
After you have configured your library, you can add cartridges and put it into
operation. You can operate the library in either Random or Sequential mode.
Random mode (the default)—The library processes cartridges according to
commands issued from an application.
Sequential mode (see
)—The library automatically processes the
cartridges in sequential order. See
for instructions on how to set the
library to operate in Sequential mode.
During normal operation, you do not need to intervene in library activities.
However, you may occasionally need to perform the following tasks,
described in this chapter.
! ! ! !
Important
If you are using a backup application which is capable of
controlling the library, do not configure the library to operate
in Sequential mode.
To view this information...
go to...
Preparing cartridges
Inserting and moving cartridges
Loading cartridges into a magazine
Removing cartridges from the library
Issuing a Re-inventory command to the library
Loading and unloading cartridges from the tape drive(s)
Cleaning the tape drive(s)
Resetting the library
Storing cartridges that you have removed from the library