Справочник Пользователя для Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102

Модели
052102
Скачать
Страница из 278
210
P
RODUCT
 M
ANUAL
 
1016988
A
PPENDIX
 A—S
PECIFICATIONS
R
ELIABILITY
The mean cycles between failures (MCBF) for the library is 250,000 cycles. This 
value does not include failures attributable to the tape drive or cartridges.
During one full cycle, the library completes the following actions:

Picks a cartridge from a tape drive

Places the cartridge in its cell

Picks a new cartridge from the cartridge cell

Loads the new cartridge into the tape drive
P
OWER
 S
PECIFICATIONS
This sections describes the following power specifications for the library:

AC input voltages and power consumption

Power cord specifications
AC I
NPUT
 V
OLTAGES
 
AND
 P
OWER
 C
ONSUMPTION
The library includes an internal power supply that is capable of accepting 100 
to 240 VAC at 50 or 60 Hz. The library has automatic AC input voltage 
selection. The library is capable of continuous operation when the AC power 
experiences intermittent operation, voltage surges, and voltage spikes. The 
maximum operating power consumption for the library is 65  Watts RMS.
P
OWER
 C
ORD
 S
PECIFICATIONS
The library is shipped with one power cord for use in Europe.
European Power Cord Specifications  
Requirements for International 220 VAC Power Cord
If you plan to use the library in a location other than Europe, you must supply 
a power cord that meets the following specifications:

The power cord must have a grounded attachment plug of the proper type, 
rating, and safety approval for the intended country.
Table A-4 Power Cord Specifications
Power Cord
Description
Use
Connectors and Cordage
Certifications
European
2.5-meter (8.2-foot) 230 to 
250-volt
ƒ
One CEE 7/7 male connector
ƒ
One IEC 320 C13 female 
connector
ƒ
Cordage is CENELEC HD-21
VDE approved