Справочник Пользователя для Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102
Модели
052102
A
PRIL
2007
S
TORAGE
L
OADER
2U LTO
235
R
EMOVING
THE
L
IBRARY
FROM
THE
R
ACK
c.
c.
c.
c.
Secure the lock with the screw as shown here.
4.
4.
4.
4. Replace the magazine.
While supporting it, gently slide the left magazine
straight into the library. When you encounter resistance, press the magazine
firmly and it “snaps” into place.
A
CCESSORIES
After installing the shipping lock (any version), remove the following from the
library and tape drives:
Power cord
Ethernet cable
SCSI cables or Fibre Channel cables
SCSI terminator
R
EMOVING
THE
L
IBRARY
FROM
THE
R
ACK
If the library is installed in a rack, remove it as described below.
Figure D-5 Shipping lock replacement–step 3c
Screw
Lock handle
Caution
Use care not to twist the magazine or move it side to side as you insert or
remove it from the library. Not inserting it straight into / pulling it straight out of
the opening can damage components inside the library.
Warning
The library weighs 43 pounds (19.5 kg). Two people are needed to move or lift
the library. Most of the weight is toward the back of the library.
Warnung
Die Library wiegt 19.5 kg. Es sind mindestens 2 Personen erforderlich, um die
Library zu bewegen oder zu heben. Der hintere Teil Library hat das Gröβte
Gewicht.
La biblioteca montada sobre bastidor pesa 19.5 kg. Se necesitan dos personas
para mover o levantar la biblioteca. La parte trasera de la biblioteca es la de
mayor peso.
Advertencia
! ! ! !
Important
Do not ship the rack-mounting hardware if you are returning the
library for service.