Справочник Пользователя для Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102
Модели
052102
A
PRIL
2007
S
TORAGE
L
OADER
2U LTO
13
I
NSTALLING
THE
L
IBRARY
IN
A
R
ACK
I
NSTALLING
THE
L
IBRARY
IN
A
R
ACK
The StorageLoader 2U LTO library is designed to be installed in a standard
4-post, 19-inch rack, using 2 units (2U) of rack space. Please read the entire
section before you begin. Two-post racks will not support the StorageLoader 2U
LTO library.
The rack-mount kit includes the following items:
To install the library in a rack, you must obtain these tools:
A
SSEMBLING
THE
R
AILS
1.
1.
1.
1.
Measure the depth of your rack—Using a tape measure, measure the inside
distance from the front mounting holes of your rack to the back mounting
holes. See
, distance (E).
2.
2.
2.
2.
Position the front and back sections of the left-side rail as shown in
, with the front rail section on top of the back rail section. Spread
the sections to the distance you measured in step 1.
18 – M5 x 12 Crest Cup™ screws (black)
(includes two spare screws)
2 – sets of side support rails
(left-side front and back rails and
right-side front and back rails)
2 – M3 x 8 Crest Cup screws (silver)
8 – washers
8 – washers
#2 Phillips screwdriver
Level
Tape measure
! ! ! !
Important
The rails provided with the library are designed for a 4-post
rack. A 2-post rack will not support the weight of the library.