Справочник Пользователя для Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102
Модели
052102
16
P
RODUCT
M
ANUAL
1016988
C
HAPTER
2—I
NSTALLING
THE
L
IBRARY
6.
6.
6.
6.
Using a #2 Phillips screwdriver, tighten the four screws holding the rail
assembly together.
7.
7.
7.
7. Right side rail assembly
—Repeat steps 1 through 6 for the right-side rail
assembly. Make sure that the right rail assembly is at the same level as the
left rail assembly.
A
TTACHING
THE
L
IBRARY
TO
THE
R
AILS
To attach the library to the rails:
1.
1.
1.
1.
From the front of the rack, place the library onto the shelf created by the
rails.
2.
2.
2.
2.
Remove the shipping lock from the library (if it is still installed). Carefully
slide the library all the way back until it makes contact with the small
flanges at the back of the rails (see
).
Warning
The library weighs 43 pounds (19.5 kg). Two people are needed to move
or lift the library. Most of the weight is toward the back of the library.
Warnung
Die Library wiegt 19.5 kg. Es sind mindestens 2 Personen erforderlich,
um die Library zu bewegen oder zu heben. Der hintere Teil Library hat
das gröβte Gewicht.
Advertencia
La biblioteca montada sobre bastidor pesa 19.5 kg. Se necesitan dos
personas para mover o levantar la biblioteca. La parte trasera de la bib-
lioteca es la de mayor peso.
Figure 2-4 Placing the library on the rails