Техническая Спецификация для Tycon Systems TP-DCDC-1224-HP
High Power DC to DC Converter
Features
Input Voltage 12VDC, 24VDC or 48VDC
Passive POE Output voltage 24VDC or 56VDC
IEEE802.3at Model Available
High Power up to 35W
Integrated POE Inserter
Low self consumption power
Short Circuit, Over Current and Reverse/Over Voltage Protection
High Temperature Operation
Applications
12V, 24V and 48V Battery Systems
Wireless Access Points and Client Devices
IP Phone and Security Camera Systems
Description
The TP-DCDC-HP Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability
solution for those requiring 24VDC or 56VDC Power Over Ethernet voltage from a 12V, 24V or 48V battery system.
They have an integrated POE injector. Passive POE and 802.3at models are available. They have two inputs for
connecting 2 power sources, like a primary and backup power source.
solution for those requiring 24VDC or 56VDC Power Over Ethernet voltage from a 12V, 24V or 48V battery system.
They have an integrated POE injector. Passive POE and 802.3at models are available. They have two inputs for
connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack.
They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for
surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the
units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are
negative voltage based.
They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for
surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the
units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are
negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT-S) are available to split the data and
DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER-S cable can be used.
DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER-S cable can be used.
Device Pinouts
RJ-45 Input (Data Only)
RJ-45 Output (Data & Power)
Pin
Symbol
Description
Symbol
Description
1
RX+
Data Receive(+)
RX+
Data Receive(+)
2
RX-
Data Receive(-)
RX-
Data Receive(-)
3
TX+
Data Transmit(+)
TX+
Data Transmit(+)
4
NC
No Connection
+Vdc
DC power(+)
5
NC
No Connection
+Vdc
DC power(+)
6
TX-
Data Transmit(-)
TX-
Data Transmit(-)
7
NC
No Connection
-Vdc
DC power(-)
8
NC
No Connection
-Vdc
DC power(-)
DATA SHEET
TP-DCDC - HP
TP-DCDC-HP