Справочник Пользователя для Fieldmann FZC 1001-A
EN
8
Assembly
|
Operating instructions
FZC 1001-A
4. ASSEMbLY
1. fitting telescopic tube to the machine body
Insert the telescopic tube into the hole on the machine body fix it with nut and screw (9) (Fig.1).
2. assembly handle
Fit handle to the telescopic tube, make sure the 2 holes on the handle Match 2 holes on the telescopic tube
(Fig 2), fix handle to the telescopic with 2 screws and nuts. (Fig.3)
3. assembly extension misting wand
Twist off the nozzle counterclockwise (Fig.4), Twist on the Extension wand nozzle in clockwise (Fig.5)
4. fit spray gun set to the machine body.
Unscrew the fill cap, Put pickup tube into Tank through the fill hole, screw the fill cap on (Fig.6)
Put the spray gun to the holster (Fig.7), tighten the fixing tape (Fig.8)
5. fit nozzle to the telescopic tube
Two different nozzles supplied. To avoid nozzle lost, we suggest to fit the nozzle on telescopic tube when the
other on spray gun.
a. Screw the nozzle clockwise (Fig.9) on telescopic tube.
b. Fit wand nozzle to telescopic tube (Fig.10)
Insert the telescopic tube into the hole on the machine body fix it with nut and screw (9) (Fig.1).
2. assembly handle
Fit handle to the telescopic tube, make sure the 2 holes on the handle Match 2 holes on the telescopic tube
(Fig 2), fix handle to the telescopic with 2 screws and nuts. (Fig.3)
3. assembly extension misting wand
Twist off the nozzle counterclockwise (Fig.4), Twist on the Extension wand nozzle in clockwise (Fig.5)
4. fit spray gun set to the machine body.
Unscrew the fill cap, Put pickup tube into Tank through the fill hole, screw the fill cap on (Fig.6)
Put the spray gun to the holster (Fig.7), tighten the fixing tape (Fig.8)
5. fit nozzle to the telescopic tube
Two different nozzles supplied. To avoid nozzle lost, we suggest to fit the nozzle on telescopic tube when the
other on spray gun.
a. Screw the nozzle clockwise (Fig.9) on telescopic tube.
b. Fit wand nozzle to telescopic tube (Fig.10)
Warning: Using accessories or attachments that are not recommended in this user's manual may inc-
rease the risk of injury.
5. OPERATING INSTRUCTIONS
The battery should be fully charged before using for the first time. The charging time is about 3~5 hours.
The battery charger supplied matches the lithium battery installed in the Garden sprayer and you must not use
The battery charger supplied matches the lithium battery installed in the Garden sprayer and you must not use
any other charger to recharge the garden sprayer.
To protect the lithium battery against deep discharging, when the battery is flat, the tool will automatically
switch off via a protective circuit.
Warning: If the trigger is used continually, the lithium battery can be damaged.
chargIng procedure (see pic. 1 and 2)
Warning: The tool do not function during the charging process.
1. Insert the charger cable (20) into charging inlet (19)on the tool.
2. Making sure the wall outlet in your home is normal household voltage (AC 230V 50Hz); insert the battery char-
2. Making sure the wall outlet in your home is normal household voltage (AC 230V 50Hz); insert the battery char-
ger plug into the mains power supply.
3. The red LED charging indicator (18) lights up to tell you that the battery pack is on charge. The battery is fully
charged when the red LED charging indicator (18) is no longer light.
During the charging process, the body of the tool will warm up, but this is perfectly normal.
When not using the tool for extended periods, disconnect the battery charger from the socket.
When not using the tool for extended periods, disconnect the battery charger from the socket.
FZC 1001-A navodA5.indd 8
9.8.11 18:42