Листовка для Metra AX-ADXSVI-MB2
INSTAX-ADXSVI-MB2
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/18/13
INSTAX-ADXSVI-MB2
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/18/13
INSTAX-ADXSVI-MB2
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/18/13
INSTAX-ADXSVI-MB2
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/18/13
AX-ADXSVI-MB2
Mercedes accessory and NAV output CAN Interface 2005-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
WIRING THE AX-ADXSVI-MB2
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
WIRING THE AX-ADXSVI-MB2
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
WIRING THE AX-ADXSVI-MB2
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
WIRING THE AX-ADXSVI-MB2
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the
aftermarket radio.
• Connect the
White/Black wire to the left front negative speaker output of the
aftermarket radio.
AX-ADXSVI-MB2
Mercedes accessory and NAV output CAN Interface 2005-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
AX-ADXSVI-MB2
Mercedes accessory and NAV output CAN Interface 2005-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
MERCEDES
C Class
2005-2011
CLK Class
2005-2009
SLK Class
2005-2001
G Class
2007-2012
E Class
2010-up
GLK
2010-2012
R Class
2006-2011
APPLICATIONS
AX-ADXSVI-MB2
Mercedes accessory and NAV output CAN Interface 2005-up
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
APPLICATIONS
MERCEDES
C Class
2005-2011
CLK Class
2005-2009
SLK Class
2005-2001
G Class
2007-2012
E Class
2010-up
GLK
2010-2012
R Class
2006-2011
MERCEDES
C Class
2005-2011
CLK Class
2005-2009
SLK Class
2005-2001
G Class
2007-2012
E Class
2010-up
GLK
2010-2012
R Class
2006-2011
MERCEDES
C Class
2005-2011
CLK Class
2005-2009
SLK Class
2005-2001
G Class
2007-2012
E Class
2010-up
GLK
2010-2012
R Class
2006-2011