Техническая Спецификация для Velleman ABS175R1
Substances:
CAS nr.
identification
Hazard – risk
8003-563-9
ABS
None known
110-30-5
N, N Ethylene bisteramide
None known
51063-13-9
Poly (DL Lactide)
None known
Quality of selected polymers:
- Residual monomer < 0.2%
- Residual solvent < 0.02%
- Residual catalyst <200ppm
- Heavy metal < 10ppm
- Water content:
- Residual solvent < 0.02%
- Residual catalyst <200ppm
- Heavy metal < 10ppm
- Water content:
≤
0.5%
NFPA rating / HMIS rating:
Health hazard information:
Unlikely to cause irritation
Medical conditions aggravated by exposure: none expected, based on available information
Medical conditions aggravated by exposure: none expected, based on available information
First aid:
Eye contact:
Solid or dust may cause irritation or corneal injury due to mechanical action
Skin contact:
Essentially non-irritating to skin, mechanical injury only
Inhalation:
No harmful effects expected, if any symptoms obtain medical support
Ingestion:
No harmful effects expected, if any symptoms obtain medical support
Precautions for safe handling and use:
For operations where eye or face contact can occur, eye protection is recommended
Avoid breathing dust, although it is non-irritating to skin it is advisable to wash hands thoroughly with
soap and water after handling
Hot and/or melted polymer can severely burn the skin – handle with care
Extrude only in a well-ventilated area, although there are no human health effects aggravated by
exposure to this product certain sensitive individuals and individuals with respiratory impairments may
be affected by exposure to components in the processing fumes. The processing fumes may cause
eye, skin and respiratory tract irritation and in severe cases nausea and headache.
Never burn filament, toxic gasses and vapors will be generated if exposed to fire.
If exposed to fumes from overheating or combustion leave contaminated area and breathe fresh air,
seek medical attention if symptoms develop (at a later time).
Avoid breathing dust, although it is non-irritating to skin it is advisable to wash hands thoroughly with
soap and water after handling
Hot and/or melted polymer can severely burn the skin – handle with care
Extrude only in a well-ventilated area, although there are no human health effects aggravated by
exposure to this product certain sensitive individuals and individuals with respiratory impairments may
be affected by exposure to components in the processing fumes. The processing fumes may cause
eye, skin and respiratory tract irritation and in severe cases nausea and headache.
Never burn filament, toxic gasses and vapors will be generated if exposed to fire.
If exposed to fumes from overheating or combustion leave contaminated area and breathe fresh air,
seek medical attention if symptoms develop (at a later time).
0
1
0
HEALTH
0
FIRE
1
REACTIVITY 0