Справочник Пользователя для Meru Networks AP1020I

Скачать
Страница из 3
Regulatory Approval 
FCC
EU R&TTE Directive 1995/5/EC
RS-210
ICES-003
VCCI
ARIB-STD33 & STD66
For more country-specific regulatory 
approvals, please contact your Meru 
representative.
Certifications
Wi-Fi certified 802.11a/b/g/n
RoHS Compliant
WEEE Compliant 
REACH Compliant
UL2043 Compliant (AP1010e and 
AP1020e only)
Warranty
Limited lifetime warranty
Part Numbers
AP1010i  
Dual-band, selectable single-radio 
802.11a/b/g/n access point; includes 
integrated dual-band antennas
AP1010e  
Dual-band, selectable single-radio 
802.11a/b/g/n access point with two 
external RPSMA antenna connectors; 
includes two dual-band rubber duck 
antennas
AP1020i  
Dual-band, concurrent dual-radio 
802.11a/b/g/n access point; includes 
integrated dual-band antennas
AP1020e  
Dual-band, concurrent dual-radio 
802.11a/b/g/n access point with four 
external RPSMA antenna connectors; 
includes four dual-band rubber duck 
antennas
QoS
WMM support
Dynamic WMM rate adaptation
Configurable QoS rules per user and application
OPERATING MODES
Centralized deployment mode
Distributed deployment mode
Mesh mode
SECURITY
WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-
TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5)
802.1X and captive portal authentication against local database on the 
controller, RADIUS, and Active Directory
RADIUS-assisted per-user and per-ESSID access control via MAC filtering
MANAGEMENT
Centrally managed by any Meru controller running System Director 
Automatically discovers controllers and downloads configuration settings 
for plug-and-play deployment
Upgrades and management using System Director/E(z)RF
®
 Network 
Manager
Support for SNMP
WIRELESS SPECIFICATIONS
Radio Technologies
AP1010: Single-radio, selectable dual-band 802.11n indoor access point; 
2x2 MIMO with two spatial streams; supports both 20 MHz and 40 MHz 
channel widths
AP1020: Dual-radio, concurrent dual-band 802.11n indoor access point; 
2x2 MIMO with two spatial streams; supports both 20 MHz and 40 MHz 
channel widths
Supported radio technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
802.11n: 2x2 MIMO with two spatial streams
Modulation
Supported modulation types:
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band
Supported frequency bands:
2.400–2.485 GHz
5.150–5.250 GHz
5.250–5.350 GHz
5.470–5.725 GHz
5.725–5.875 GHz
Country-specific restrictions apply; adjusted by controller upon approval
Platform supports Dynamic Frequency Selection (DFS)
Operating Channels
2.4 GHz channels: 1 to 11 for U.S. & Canada, 1 to 13 for Europe, 1 to 13 for Japan
5 GHz channels: 36 through 165
Country-specific restrictions apply; adjusted by controller upon approval
Platform supports Dynamic Frequency Selection (DFS) for flexible 5 GHz 
channel adoption
Data Rate
Data rates supported (Mbps):
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11b: 1, 2, 5.5, 11
802.11n: 6.5–300 (MCS0 to MCS15)
Transmit Power and Receive Sensitivity (Internal Antenna Model)
Maximum 
Transmit Power 
(EIRP)
Receive 
Sensitivity  at 
Lowest Data Rate
IEEE 802.11b
23 dBm
-83 dBm
IEEE 802.11g
20 dBm
-83 dBm
IEEE 802.11a
19 dBm
-86 dBm
2.4GHz  IEEE  802.11n  (HT20)            
19 dBm
-83 dBm
2.4GHz  IEEE  802.11n  (HT40)             
19 dBm
-83 dBm
5GHz  IEEE  802.11n  (HT20)                
17 dBm
-86 dBm
5GHz  IEEE  802.11n  (HT40)                 
16 dBm
-83 dBm
Transmit Power and Receive Sensitivity (External Antenna Model)
Maximum 
Transmit Power 
(EIRP)
Receive 
Sensitivity  at 
Lowest Data Rate
IEEE 802.11b
22 dBm
-82 dBm
IEEE 802.11g
19 dBm
-82 dBm
IEEE 802.11a
17 dBm
-84 dBm
2.4GHz  IEEE  802.11n  (HT20)            
18 dBm
-82 dBm
2.4GHz  IEEE  802.11n  (HT40)             
18 dBm
-82 dBm
5GHz  IEEE  802.11n  (HT20)                
15 dBm
-84 dBm
5GHz  IEEE  802.11n  (HT40)                 
14 dBm
-81 dBm
 
Configurable Transmission Power
Transmission power configurable in 1.0 dBm increments 
PHYSICAL SPECIFICATIONS 
Antenna
AP1010i: Two integrated dual-band omnidirectional antennas with typical 
gain of 4.0 dBi for 2.4 GHz and 5.0 dBi for 5 GHz 
AP1010e: Two extended reverse polarity SMA connectors. Ships with two 
omnidirectional rubber duck antennas with typical gain of 2.0 dBi for 2.4 
GHz and 3.0 dBi for 5 GHz. Other external antenna options are available. 
AP1020i: Four integrated dual-band omnidirectional antennas with typical 
gain of 4.0 dBi for 2.4 GHz and 5.0 dBi for 5 GHz 
AP1020e: Four extended reverse polarity SMA connectors. Ships with four 
omnidirectional rubber duck antennas with typical gain of 2.0 dBi for 2.4 
GHz and 3.0 dBi for 5 GHz. Other external antenna options are available.
Power
802.3af PoE and 802.3at PoE 
5V external power adapter (sold separately)
Interfaces
One 10/100/1000 BASE-T Ethernet (RJ45), auto-sensing link speed and 
MDI/MDX, with 802.3af PoE
One RJ45 console
One USB 2.0 port (Type-A connector)
One built-in Kensington security slot (included in AP1010e and AP1020e)
AP1010e: Two reverse polarity SMA connectors
AP1020e: Four reverse polarity SMA connectors
Indicators
Two status LEDs (on front cover) for power, Ethernet activity, and  
wireless activity
Mounting
Wall or ceiling mount 
Access point includes:
Mount over 15/16” T-bar (no tools required) 
Lockable wall-mount kit (included in AP1010e and AP1020e)
Lock key to lock the access point to a ceiling (for AP1010i and AP1020i)
Other mounting kits sold separately:
MNT-SCRMKIT-03, mounting adapter for recessed ceiling or narrow 
T-bars (5-pc package)
MNT-SCRMKIT-04, mounting adapter for Interlude/Silhouette T-bars 
(5-pc package)
MNT-WMKIT-01, optional lockable wall-mount kit for AP1010i and 
AP1020i (5-pc package)
Dimensions
AP1010i: 6.75” x 6.50” x 2.50” (17.10 cm x 17.10 cm x 5.70 cm)
AP1010e: 6.33” x 4.50” x 1.50” (16.10 cm x 11.40 cm x 3.80 cm)
AP1020i: 6.75” x 6.50” x 2.50” (17.10 cm x 17.10 cm x 5.70 cm)
AP1020e: 6.50” x 4.50” x 1.50” (16.10 cm x 11.40 cm x 3.80 cm)
Weight
AP1010i: 0.95 lb (0.44 kg)
AP1010e: 1.08 lb (0.49 kg)
AP1020i: 1.01 lb (0.46 kg)
AP1020e: 1.12 lb (0.51 kg) 
Environmental
Operating temperature: 32˚F to 122˚F (0˚C to 50˚C)
Operating humidity: 5–95% (non-condensing)
Storage temperature: -40˚F to 185˚F (-40˚C to 70˚C) ambient
Storage humidity: 5–95% (non-condensing)
 
AP1010 and AP1020 
TECHNICAL SPECIFICATIONS