Листовка для AMX FG553-12

Скачать
Страница из 1
Quick Start Guide
Hydraport USB Modules
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
8/13
©2013 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time. 
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-0553-12
 REV: A
Overview
Hydraport USB Modules are designed to be used in conjunction with 
Hydraport HPX-600/900/1200 Connection Ports, as well as the HPX-1600 
Retractable Connection Port. The following Hydraport USB Modules are 
available:
• HPX-N100-USB Single USB Module (FG553-11): Provides a single 
user-accessible USB Type A connection on the face of the module, 
providing a pass-through connection from the user's equipment to a 
remote host. 
• HPX-N102-USB Dual USB Module (FG553-12): Provides two user-
accessible Type A USB connections.
Product Specifications 
Installation
Note: For instructions on installing the HPX base assembly, refer to the 
HPX-600/900/1200 and HPX-1600 Installation Guides (available online at 
www.amx.com).
CAUTION! Ensure that the AC Power cord is disconnected from IEC C-14 
power inlet connector on the Hydraport Base Assembly prior to 
disassembly of the Hydraport Base assembly or installation of a Module 
(see FIG. 2
). 
1.
Remove the End Cap as well as existing modules (as necessary) from 
the bottom of the HPX base assembly.
2.
Orient the module relative to the HPX base assembly so that the 
Module’s faceplate is facing up, towards the mounting surface.
3.
Align the Mounting Notches on the module with the Mounting Rails on 
the HPX base.
4.
Slide the module into position. 
5.
Install any remaining modules into the HPX base.
6.
Re-install the End Cap. 
Additional Documentation
For more information on Hydraport Connection Ports and modules, refer to 
the Architectural Connectivity catalog page on www.amx.com (Dealer 
Site
) for additional product documentation.
FIG. 1  
Hydraport USB Modules
Hydraport USB Modules - Specifications
Dimensions 
(HWD):
Module: 0.98” x 2.05” x .276” (25 mm x 66 mm x 7 mm)
Note that “Depth” (D) represents the depth of the module faceplate 
relative to the front of the connection ports.
Weight:
• HPX-N100-USB: 0.15 Kg (.33 lbs)
• HPX-N102-USB: 0.16 Kg (.35 lbs)
USB Ports:
• HPX-N100-USB: (1) Type A USB Sync Port (female)
• HPX-N102-USB: (2) Type A USB Sync Ports (female)
USB Cable 
lengths:
HPX-N100-USB: 1.52 m (5‘)
HPX-N102-USB: 1.83 m (6‘)
Enclosure:
Matt black finished face plate (Polycarbonate plastic).
Compatibility:
• HPX-600: 6 Module Connection Port (FG560-01-SL/BL)
• HPX-900: 9 Module Connection Port (FG560-02-SL/BL)
• HPX-1200: 12 Module Connection Port (FG560-03-SL/BL)
• HPX-1600: 16 Module Retractable Connection Port
(US - FG550-01-SL/BL, International - FG550-SL/BL)
HPX-N100-USB
Cable length = 
1.52 m (5 feet)
HPX-N100-USB
HPX-N102-USB
Cable length = 
1.83 m (6 feet)
HPX-N102-USB
FIG. 2  
Hydraport Base Assembly - Power Inlet Cord Removed
FIG. 3  Inserting a Module into the Hydraport Chassis
AC Power Cord
Power Inlet Connector 
on HPX-1600