Листовка для Dynamode 8-Port 10/100/1000Mbps Gigabit Desktop Switch SWG80010-D

8 x 10/100/1000Mbps Auto-negotiation 
Gigabit Ethernet ports. 
Auto MDI/MDI-X for each port.  
Support Full/Half duplex transfer mode for 
10/100Mbps.  
Support Full duplex transfer mode for 
1000Mbps.  
Wire speed reception and transmission.  
Store-and-Forward switching method.  
Supports 2.5Mbits RAM for data buffering.  
Extensive front-panel diagnostic LEDs.  
IEEE 802.3x flow control for full-duplex.  
Back pressure flow control for half-duplex. 
Integrated address Look-Up Engine, 
supports 8K absolute MAC addresses.  
Optional Rackmount Kit for 19” standard 
rack.  

Network Media 

Ethernet: 2-pair UTP Cat. 3,4,5, up to 100M 
Fast Ethernet: 2-pair UTP Cat. 5, up to 100M 
Gigabit Ethernet: 4-pair UTP Cat. 5 plus, up to 100M 

Protocol 

Network Data Transfer Rate 

Ethernet: 10Mbps (Half-duplex), 20Mbps (Full-duplex) 
Fast Ethernet: 100Mbps (Half-duplex), 200Mbps
 (Full-duplex) 
Gigabit Ethernet: 2000Mbps (Full-duplex) 

Data RAM Buffers 

2.5Mbits per device 

Filtering Address Table

8K entries per device 

Diagnostic LEDs 

Per Unit: Power 
Per Port: 3 LEDs 
Link/ACT, 100M, 1000M 

Power 

100 ~ 240VAC 50/60Hz, Internal Universal 
Switching Power 

Power Consumption 

22 watts. (max.) 

Dimensions (WxDxH) 

280(W) x 180(D) x 44(H) mm 

Temperature

Operating: 0 ~ 40C
Storage: -10 ~ 70C  

Humidity

Operating: 10% ~ 90% RH 
Storage: 5% ~ 90% RH 

Standards

IEEE 802.3 10BASE-T 
IEEE 802.3u 100BASE-TX 
IEEE 802.3ab 1000BASE-T   

CSMA/CD 

Emission

FCC Class A
CE mark Class A 
VCCI-A  
 

Topology 

Star

Number of Ports 

8 x 10/100/1000Mbps auto MDI/MDI-X port with 
RJ-45 connector