Листовка для Nitecore LED Torch MT40 battery-powered 860 lm 245 g Black NITMT40

®

User  Manual

• LED Premium CREE XM-L U2 LED
• Maximum output of up to 860 lumens
• High efficiency current circuit board 
• Maximum runtime of up to 24 hours
• Two rapid switching modes suit various user requirements. 
• User-defined mode allows for customized brightness levels and a 

multitude of functions

• Intelligent memory functions
• Anti-rolling design
• Reverse polarity protection
• Broad voltage drive circuit, compatible with rechargeable and 

non-rechargeable Li-ion batteries.

• Toughened ultra-clear mineral glass with anti-reflective coating
• Aluminum reflector ensures a smooth and powerful beam
• Aero grade aluminum alloy
• HA III Military grade hard anodized
• Detachable two-way anti-rolling clip
• Purpose-made rhombic knurling for better grip
• IPX-8 standard waterproof (submersible to two meters)

Length: 221.5mm (8.72”)
Head Diameter: 50mm (1.97”)
Tail Diameter: 25.4mm (1”)
Weight: 245grams (8.64oz)(without battery)

SYSMAX Industry Co., Ltd.

TEL: 

+86-20-83862000 

FAX: 

+86-20-83882723  

E-mail: 

info@nitecore.com  

Web: 

www.nitecore.com

Address：  Rm1407-08, Glorious Tower, 850 East Dongfeng Road, 

Guangzhou, China 510600

Battery installation (as the picture shows)

1. Unscrew the tail cap in a counter-clockwise direction.
2. Insert two 18650 batteries or four CR123 batteries with the positive pole 
pointing forward (toward the light head).

Switch ON: Press the button on the tailcap until a “click” is heard.
Switch OFF: Press the button at the tailcap until a second time until a “click” is 
heard. 

The Nitecore MT40 has two modes: Turbo and user-defined. These two modes 
can be changed by simply tightening and loosening the flashlight head. Turbo 
provides 100% output while user-defined users contains five selectable 
sub-modes. 

Turbo mode is accessed when the MT40 flashlight is switched ON and the 
head lightly tightened. While in this mode, momentary illumination can be 
achieved by switching off the flashlight and then half pressing and holding the 
switch. Momentary illumination can be used as a flashing signal indicator or 
apply to various tactical applications. 

User-defined mode is accessed by slightly loosening the flashlight head. In this 
mode, lightly and rapidly pressing the switch will cycle through brightness and 
other functions in the following order: “High-Mid-Low- SOS-Strobe”. Pressing 
the switch all the way down will save and memorize a desired setting.

NITECORE MT40 flashlights essentially have two modes: Turbo mode (100% 
output) and custom mode. Turbo mode is accessed by tightening the flashlight 
head while any of one of the four customizable modes (strobe, low, medium 
and high) are selected by loosening the head and rapidly pressing the on/off 
switch to cycle through the modes. A given mode can be saved by simply turn 
off the light while in that mode. Real-world examples include: When used as a 
flashlight around the home, the head can be loosened and low level selected in 
custom mode, providing long runtimes at a lower light intensity. The same 
flashlight could then be taken out and used a law-enforcement duty light, with 
user-defined mode set in strobe, making it easy to alternate between turbo 
mode and strobe with a simple twist of the flashlight head.

Every 6 months, threads should be wiped with a clean cloth followed by a thin 
coating of silicon-based lubricant.

All NITECORE® products are warranted for quality. DOA / defective products 
can be exchanged for replacement though a local distributor/dealer within the 
14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® 
products will be repaired free of charge for a period of 18 months from the date 
of purchase. After 18 months, a limited warranty applies, covering the cost of 
labor and maintenance, but not the cost of accessories or replacement parts. 
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by 

unauthorized parties.

2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please 
contact your national NITECORE® distributor or send an email to 
service@nitecore.com

Clip, tactical ring, lanyard, 
quality holster, spare plastic cap, 
and spare O-ring

SIZE

Nominal voltage

Compatible

Primary Lithium battery 

CR123

3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650

3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123

3.7V

Y

Stated data has been 
measured according to 
the international flashlight 
testing standards 
ANSI/NEMA FL1 using 
two quality NITECORE 
18650 (3.7V 2600mAh) 
batteries or four SYSMAX 
CR123 (3V 1550mAh) 
batteries under laboratory 
conditions. The data may 
vary due to individual 
usage habits and 
environmental conditions.

Ensure batteries are inserted 
with the positive (+) end 
pointing to the head. The 
MT40 will not operate with 
incorrectly inserted batteries.

NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop 
the ANSI FL1 standard of measurement. Product testing data is in accordance with 
these internationally recognized scientific standards.