Листовка для Dynamode 8 Port 10/100 Switch (Metal Case) SW80010-M

8 port 10/100 integrated Switch with Physical 
Layer Transceivers.
Build in SRAM on chip for frame buffering to 
ensure fast error free packet storage and 
transmission , which greatly improves your 
network performance.
Supports 10Base-T to 100Base-TX connectivity, 
allowing for progressive migration from 10 Base-
T to 100Base-TX technology.
Provides high throughput because Switches 
route data packers to destination port instead of 
broadcasting them to all ports. Alleviates 
congestion for applications with high-bandwidth 
requirements such as multimedia applications 
and large file transfers.
All ports support full auto-negotiation for 10Mbps 
and 100Mbps speed and half or full duplex 
mode connection.
All ports supports Auto MDI/MDI-X.
Support VLAN (808SAIV only).

 

Complies with IEEE802.3 10Base-T, 
IEEE802.3u 100Base-TX and ANSI/ IEEE 
802.3 N-Way auto-negotiation standards; 
FCC Class A; CE mark 

Industrial Standards 

Each unit has eight 10/100Mbps UTP 
ports (RJ-45) and ALL Ports Support 
Auto-MDI/MDI-X  

Interface

Auto-negotiation 

Port Speed/
Mode Selection

· 100Base-TX: can support up to 100M 
of "Category 5" UTP cable to PC, Hub or 
another Switch 

· 10Base-T: can support up to 100M 
of "Category 3,4 and5" UTP cable to PC, 
Hub or another Switch 

Link Distance 

LED indicators are provided for status 
monitoring. These include LEDS for system 
power , port traffic activity/link

LED Indicators 

2K MAC Addresses

Number of MAC 
Addresses 

768K bit

Dynamic memory 
Sharing In/out buffer 

Yes

Dynamic Addresses 
Learning/Filtering 

100~240VAC, 50~60Hz, 0.3A

Power Supply 

· Temperature: Operating: 0°C to 40°C           

· Storage: 5°C to 60°C

· Humidity: 10% to 90% non-condensing 

Environment 
Requirements

249mm(W) x 115mm(L) x 37mm(H) 

Physical Dimensions 

About 800g

Weight

UL, CSA, TUV/GS

Safety