Техническая Спецификация для Lappkabel 0047105, Single Core Wiring Cable, 1 x 0.25 mm², AWG, White Sheath 0047105
Модели
0047105
U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX HEAT 180 SiF
DB0047000
valid from: 23.03.2011
Product Developement Cable
Document:
DB0047000DE
page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
PD 0019/2.2_11.10EN
Application
ÖLFLEX HEAT 180 SiF are silicone-single cores designed for use at high ambient temperatures under adequate ventilation
and low mechanical stress. They are resistant against oil, alcohol, acids, caustic solutions, salt solution and salt water at
room temperature. The combustion gases are halogen-free and non-corrosive.
and low mechanical stress. They are resistant against oil, alcohol, acids, caustic solutions, salt solution and salt water at
room temperature. The combustion gases are halogen-free and non-corrosive.
Design
Conductor
fine strands of tinned copper wires, acc. to EN 60228 or VDE 0295, class 5
Insualation
silicone compound EI2 acc. to VDE 0207-363-1
Available core colours::
GN-YE / BK / BU / BN / BG / YE / GN / VT / PK / OG / RD / WH / GR
Available core colours::
GN-YE / BK / BU / BN / BG / YE / GN / VT / PK / OG / RD / WH / GR
Electrical properties at 20°
Insulation resistance
> 200 GΩ x cm
Rated voltage
300/500 V
Test voltage
2000 V
Mechanical and thermal properties
Bending radius
fixed installation: 6 x core Ø
One bend at end of core: 3 x core Ø
One bend at end of core: 3 x core Ø
Temperature range
fixed installation: -50˚C bis +180˚C
(adequate ventilation provided)
temporary: +200˚C
(adequate ventilation provided)
temporary: +200˚C
Flammability
flame retardant in acc. with IEC 60332-1-2
Halogen free
in acc. with IEC 60754-1
Corrosivity of gases
in acc. with IEC 60754-2
EC directive
This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)
and 2002/95/EC (RoHS, Restriction of the use of certain hazardous substances).
and 2002/95/EC (RoHS, Restriction of the use of certain hazardous substances).