Справочник Пользователя для TP-LINK TL-PA4010PKIT

 

4

 

Solid 

The Ethernet port is connected, but there is no data 
being transferred. 

Blinking  The Ethernet port is transferring data. 

 Ethernet LED 

Off 

The Ethernet port isn’t connected. 



5 minutes after the device connected to the adapter is turned off, and the adapter will automatically 
switch to the power-saving Mode.

 

In power-saving mode, the Homeplug cannot be accessed via the 

electrical wiring, but its integrated electrical socket can supply the power normally. As soon as the device 
connected to the Homeplug is switched on again, your Homeplug will leave the power-saving mode and 
the three LEDs will flash simultaneously. 

There are four physical interfaces on this Powerline Adapter.   

 

 

 

Ethernet Port 

It is a 10/100Mbps Ethernet port on the adapter for connecting it to 
the PC or the broadband device with the network cable. 

Power Plug* 

A Power Plug connected to any 100V ~ 240V AC (50~60Hz) power 
socket 

Pair Button 

Pair buttons are used to secure a powerline network. To secure 
your network, please follow the steps below. Firstly, plug in a new 
adapter, and press its pair button for 1 second; then plug in another 
adapter and press its pair button for 1 second as well. The two 
buttons should be pressed within 2 minutes of each other. After 
that, wait about 60 seconds so that the two adapters can finish 
connecting. 

Integrated Electrical 

Socket 

The integrated electrical socket allows additional devices or 
multiple sockets to be connected to the adapter just like to a normal 
wall socket. No electrical socket is lost. 

* The provided power plug may differ from the picture due to different regional power specifications. Here 
we take the EU version as an example.